24• If memory is available on your transceiver for recording, “I am not available.Leave your Message.” will be sent to the caller. The caller can then leave arecorded message on your transceiver which you can later recall and listen to.When a message is stored on your transceiver, “MSG RCVD” appears on thedisplay.• If no memory is available on your transceiver for recording, “I am not available.”will be sent to the caller and “MEMORY FULL” appears on the display.■ plAybAcKTo play back a recorded conversation, memo, or message:1 Press the key programmed as Playback to enter Playback mode.• If the last action on your transceiver was to auto record your conversation,“STORE?” will appear on the display, otherwise a recording channel with the timeof the recording will appear.• To store the conversation record in the next available recording channel, pressthe ■ key. To clear the conversation, press the A or DTMF # key. To skip tothe stored recording channels, press the S or DTMF key. To skip back 5seconds, press the key. To skip ahead 5 seconds, press the C> key.2 Press the and keys to select the channel which you want to play back.• “RM” represents automated reply messages.• “AR” represents conversation records.• “VM” represents voice memos.3 The transceiver will announce the channel, then the recording willautomatically play back.• When the entire recording has been played, “END OF MSG” (end of message) isdisplayed.• To delete the selected recording, press the A or DTMF # key. To clear all therecorded data, press and hold the A or DTMF # key. A confirmation messagewill appear on the display; press the S or DTMF key to delete the recording(s)or the A or DTMF # key to cancel.voice guideWhen pressing a transceiver key, an audio voice will announce the key function.If programmed by your dealer, an audio voice will also announce the selected calladdress, when changing call addresses.