52 Press / (if the key assignment list selection is configured as “Enabled”) or/C> to select your desired scrambler code.3 Press S, , or to store the new setting.• After changing your scrambler code, be sure to inform all of your group members ofthe new code so they can also reset their transceivers. The scrambler function willnot work with transceivers set up with different scrambler codes.monitor/ SQuelch oFFYou can use the key programmed as Monitor or Squelch Off to listen to weaksignals that you cannot hear during normal operation and to adjust the volumewhen no signals are present on your selected channel.• The icon appears on the display while Monitor or Squelch Off is activated.Your dealer can program a key with one of four Monitor/Squelch Off functions:• Monitor: Press to deactivate QT, DQT, DTMF, 5-tone, or FleetSync Signaling. Pressagain to return to normal operation.• Monitor Momentary: Press and hold to deactivate QT, DQT, DTMF, 5-tone orFleetSync Signaling. Release to return to normal operation.• Squelch Off: Press to hear background noise. Press again to return to normaloperation.• Squelch Off Momentary: Press and hold to hear background noise. Release to returnto normal operation.n Squelch LevelIf a key has been programmed as Squelch Level, you can readjust yourtransceiver’s squelch level:1 Press the key programmed as Squelch Level.• The icon appears on the display, along with the current squelch level.2 Press / (if the key assignment list selection is configured as “Enabled”)or /C> to select your desired squelch level from 0 to .3 Press S or to store the new setting.key lockPress the key programmed as Key Lock to lock the transceiver front panel andmicrophone keys.• When any key is pressed while Key Lock is active, “LOCKED” momentarily appears onthe display.Press the Key Lock key again to unlock the keys.SignAl StrengthThe Signal Stength indicator shows the strength of received signals:Strong Sufficient Weak Very Weak