• “BUSY” appears on the display when you press the PTT switch. Use a different channelor wait until the channel becomes free.If your dealer has programmed BCL Override for your transceiver, you canoverride the BCL by pressing the PTT switch again, immediately after releasing it,when the channel is busy.ptt idPTT ID is the transceiver unique ID code which is sent each time the PTT switchis pressed and/or released.compAnderIf programmed by your dealer for a channel, the compander will removeexcessive noise from transmitted signals, providing higher clarity of signals.trAnSmit powerYour dealer has programmed a transmit power level for each channel. Powerlevels can be high or low.VGS-1 OPTIONAL VOICE GUIDE & STORAGE UNITWhen using the optional VGS- voice guide & storage unit, you gain access to thevoice recorder and voice announcement functions. Ask your dealer for details.Voice recorderThe voice recorder provides you with an auto recorder to record yourconversations and a voice memo function to create voice memos.n Auto RecordingIf activated, the auto recording function will continuously record all transmittedand received signals. The recording storage area retains 30 seconds ofrecording, so all transmitted and received signals are simultaneously recordedand erased, leaving only the last 30 seconds of recording in memory.• The icon appears on the display when the Auto Recording functionis activated.n Voice MemosYou can record a voice memo for later playback.1 Press the key programmed as Voice Memo or press and hold the keyprogrammed as Playback for second.• The duration of recording memory will appear on the display and begin countingdown.2 Speak into the microphone to record your voice memo.