Kenwood TK-790 Service Manual

Also see for FleetSync TK-790: Specifications Instruction manual Specifications Instruction manual

4TK-790/(B)/H(B)Before Reading About System Set-upThe TK-790(B)/H(B) is a transceiver main unit (without apanel or speaker) that you complete by adding options.The options are classified into three types according tooperation and function.1. Install the front panel kit (controller) directly on a radio tooperate it. (Form : Radio + KCH-10/11)2. Remotely control one radio with one controller. (Form: Radio + KRK-5 + KCH-10/11 + KCT-22M/M2/M3)SYSTEM SET-UP*Service manual parts No. listModel Parts No.KRK-5/6DH B51-8445-00KRK-7DB/8DBH B51-8452-00Merchandise receivedLicense and frequency allocated by FCCChoose the type of transceiverTK-790/(B), TK-790H(B) (Radio 1)TK-790(B) or TK-790H(B) is complete by combiningoptions with only the transceiver body (without panel)Are you using the remote kit?KCH-10 (Basic model)Front panel kitKCH-11 (Full featuredmodel) Front panel kitSupplied accessory knobAre you using one radio with two controllers?Are you using one radiowith one controller?Are you using two radios with one controller?Are you using two radios with two controllers?TK-790 : Contain (KCH-10)Are you using the printed keytops?KRK-5Single control head kitKRK-7DBDual band remote kitKRK-6DHDual control head kitKCH-10 KCH-11 KCH-10 KCH-11KCH-10+KCH-10KCH-10+KCH-11KCH-11+KCH-11or oror orKCT-22M/M2/M3Control cableYESYES*See Remotekit servicemanualNONOSeepage 16 See page 16See page 16YESKRK-8DBHDual band dual control head kitKCH-10+KCH-10KCH-10+KCH-11KCH-11+KCH-11or orYESYESFrequency range148~174MHz148~174MHzYES*See Remote kitservice manualAre you using the voice scrambler?Transceiver programming (option)Are you using the external speaker?KCT-23 (DC cable)Are you using the ignition sense cable?DeliveryModified of control unitYESNONONOKES-4 (EXT. SP)YESKCT-18YESSee page 18See page 18See page 17See page 13A personal computer (IBM PC or compatible), programming interface (KPG-43),and programming software (KPG-44D) are required for programming.(The frequency and signalling data are programmed for the transceiver.)See Installation manualKCT-23 M,M3 : TK-790/(B), KCT-23 M2,M4 : TK-790H(B)RF power45W110WTK-790/(B) F1136~156MHz 45W TK-790(B) F2TK-790H(B) F1Type3. Remotely control one radio with two controllers. (Form: Radio + KRK-6DH + KCH-10/11 (two) + KCT-22M/M2/M3 (two))4. Remotely control two radios with one controller. (Form: Radios (two) + KRK-7DB + KCH-10/11 + KCT-22M/M2/M3)5. Remotely control two radios with two controllers. (Form: Radio (two) + KRK-8DBH + KCH-10/11 (two) + KCT-22M/M2/M3 (two))