Kenwood TK-885 Service Manual
Also see for TK-885: Instruction manualService manual
                                                    | |
Contents
|
35TK-885ADJUSTMENTAdjustment Location Switch Adjustment Point Note• Flash memoryThe firmware program (User mode, Test mode, Tuningmode, etc.), the data programmed and security number(MPT serial number) by the FPU (KPG-62D) for the flashmemory, is stored in memory. When parts are changed,program the data again.• EEPROMThe tuning data (Deviation, Squelch, etc.) for theEEPROM, is stored in memory. When parts are changed,readjust the transceiver.MeasurementTest-equipment Unit TerminalAdjustmentUnit Parts Method Specifications/RemarksConditionItem1. PLL lock 1) Set test mode DVM TX-RX TP1 PLL TC106 1.5V (Receive) ± 0.1Vvoltage CH : CH3 - Sig1 Power meter (A/2)PTT : OFF (Receive) TC109 1.5V (Transmit)PTT : ON (Transmit)2) CH : CH2 - Sig1 Check 8.0V or lessPTT : OFF (Receive)PTT : ON (Transmit)Common SectionL6VR1TX-RX UNIT (A/2)PLL/VCOTC106TP1TC109L207L203 Repair Jig (Chassis)Use jig (Part No. : A10-4010-02) for repairing the TK-885.The jig facilitates the voltage check when the voltage on thecomponent side TX-RX unit is checked during repairs.PowerswitchTX/RXindicatorMicrophonejack A B C D CALLVolumeup/downSystemup/down |
Related manuals for Kenwood TK-885
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine