Kenwood TM-231A Instruction Manual

Also see for TM-231A: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

@ Cail Channel1. Press the VFO key to selectthe VFO mode.2. Select the desired operat-ing frequency, tone dataetc. (For example 449.920MHz)3. Press the F key momentar-ily. The F indicator will turnon and the Memory chan-nel indicator will turn on.(Channel 8 in the example)4. Press the CALL key within40 seconds of pressing theF key to enter the data intomemory. A long beep willsound and the F indicatorand memory channel indi-cators will turn off to con-firm data entry.Sake TS Te TS er4-4-6. Memory Channel RecallWhen recalling a memory channel using this procedure youwill not be able to adjust the frequency or tone data. Thememory channel acts very much like the old crystal con-trolled radios, i.e. the data is fixed and cannot be changedby mistake.1. Press the MR key to select the MR mode. The memorychannel indicator will turn on in the display.2. Rotate the tuning control or press the microphoneUP/DOWN switches to select the desired memory channel.244-4-7. Memory ShiftUsing this function you can copy the contents of a memorychannel or CALL channel to the VFO without changing thedata in memory. This will allow you to change the tone data,or tune normally if you wish.1. Press the MR key or CALLkey to select the appropri-ate mode.2. Press the F key momentar- a)ily. The F indicator willlight.3. Press the VFO key within40 seconds of pressing theF key. The F indicators willturn off to signal the datahas been successfullytransferred to the VFO.the VFO.Note:If an Odd Split Memory channel is selected you will onlytransfer the Receive data. Transmit data will not be copied.