36OPTIONSThe following options are available for use with this transceiver:• MC-45 Microphone• MC-59 Microphone with keypad• MCP-2A Memory Control Program(web download software)• MJ-88 Microphone Plug Adapter• MJ-89 Modular Plug MicrophoneSwitch• PG-2N DC Cable (2 m)• PG-20 DC Cable (7 m)• PG-3B Noise Filter• PG-5A Data Cable• PG-5G Programming Interface Cable(2 m)• PG-5H PC Interface Cable Kit (2 m)• PG-5F Extension Cable Kit (4 m)• PS-33 DC Power Supply• PS-53 DC Power Supply• SP-50B External Speaker• VGS-1 Voice Guide & Storage UnitNote: Optional accessories for use with this transceiver may change, post-production. (Newoptions may become available and/or current options may be discontinued.) Please refer to theoptions catalog(s) for applicable transceivers.MeMOry cONTrOl PrOgraM McP-2aThe following functions can be set only by using the MCP-2A software:• SQC active condition• Microphone sensitivity level• 10 MHz mode selection• Power on password valueUsing the MCP-2A software, you can:• View memory channel groups• Name memory groups• Name PM channels• Save/load settings• Read exported TravelPlus for Repeaters™ files issued from the ARRL™(There are some version restrictions; refer to the help text of the MCP-2A.)• Print/export memory and various settings in html(TravelPlus for Repeaters is a trademark of ARRL.)To download the MCP-2A software, go to:http://www.kenwood.com/i/products/info/amateur/software_download.htmlNote: This URL may change without notice.n Using the McP-2a Software1 Follow the directions of the installer to install the software.2 Set up the PC COM port and baud rate.3 The transceiver data is read from the MCP-2A software.4 Select your desired settings, then write the data to the transceiver.