9015 OPERATOR CONVENIENCESn Sending Messages1 Select SSB, FM, or AM.• Use the same mode for transmitting andreceiving.2 Press [VOX/ LEVEL] to switch VOX ON orOFF.• If you switched VOX ON, skip step 3.3 Press [SEND], or press and hold Mic [PTT].4 Press [1/ CH1/REC], [2/ CH2/REC], or[3/ CH3/REC], depending on which channelyou want to use.• For example, “s PLAY BACK” and “AP 1– –”appear while playing back the message inchannel 1.• To interrupt playback, press [CLR].5 To play back another message in sequence,press the corresponding key ([1/ CH1/REC],[2/ CH2/REC], or [3/ CH3/REC]) while the firstmessage is being played.• Up to 3 channels can be queued.6 If you pressed [SEND] or Mic [PTT] in step 3,press [SEND] again or release Mic [PTT].n Erasing a Recorded Message1 Press [FUNC] then [1/ CH1/REC] or[2/ CH2/REC] or [3/ CH3/REC] to select themessage which you want to erase.• “¡|| REC WAIT” and “APn –” appear, where“n” represents the channel number.2 To erase the recorded message, press andhold the same key as in step 1 ([1/ CH1/REC],[2/ CH2/REC], or [3/ CH3/REC]), and press[CLR] at the same time.• A beep sounds and the message is erased.n Changing Inter-message Interval TimeFor repetitive message playback, you can changethe interval between each series of messages.Use Menu No. 29B, and select the time in therange of 0 to 60 seconds.n Changing Playback VolumeTurning the MAIN AF or SUB AF control does notchange the volume for playback. To change thevolume, access Menu No. 14 to select theplayback volume level from OFF and 1 to 9.
