Kenwood VR-4090 Connect And Set Up

Also see for KRF-V7773D: User guide Instruction manual Service manual Service manual

Contents

19Chapter One : Connecting Your DevicesConnectionsConnecting Your CD-R Recorder, continuedDo not plug in the receiver to AC power until you haveconnected all your devices.This section focuses on the connections from your CD-Rrecorder to the VR-4090/VR-4080/KRF-V7773D. Please re-fer to your CD-R recorder instructions for more detail aboutits connection jacks and capabilities.Each set of instructions in this section shows one of severalpossible variations on connecting your CD-R recorder. Forfurther assistance on optional configurations, contact thestore where you purchased your CD-R recorder.To Connect an CD-R Recorder:1. Connect the audio cable from the CD-R recorder’s PlayOUT jacks to the receiver’s CD-R PLAY IN jacks as shownto the left.2. Connect the audio cable from the CD-R recorder’s RecIN jacks to the receiver’s CD-R REC OUT jacks, as shownto the left.3. (VR-4090 only:) When the CD-R recorder has digitaljacks, connect digital (coaxial or optical) cables betweenthe CD-R recorder’s digital jacks and the receiver’s CD-R digital jacks, as shown to the left. (Although the fig-ure shows both the coaxial cable connection and opti-cal cable connection, use either connection in actualcase.)When connecting a digital optical cable, remove theprotect covers from the optical jacks.You only need to connect to the digital out jack if youwill be recording from sources that are connected to adigital in jack, such as a CD or DVD player.4. Go to “Noting Your Devices” on page␣ 3 and note whichjacks you used to connect your CD-R recorder. In addi-tion, note the brand name and model number of theCD-R recorder.