28Chapter One : Connecting Your DevicesConnectionsConnecting Your Turntable/Record PlayerDIGITAL OUTDVDCD1MD/TAPE1CD-RVIDEO2VIDEO3VIDEO4OPTICALDIGITAL INCOAXIALS VIDEO VIDEORECOUTPLAYINRECOUTPLAYINPLAYINPLAYINPLAYINMONITOROUT SURROUNDCENTER SUBWOOFERDVD/6 CH. INPUTVIDEO4VIDEO3VIDEO2VIDEO1DVDFRONTR LAUDIOSIGNALGNDR LLRLRAUDIO PRE OUTRF REMOTE ANTENNASYSTEMCONTROLPHONOCD1RECOUTPLAYINMD/TAPE1RECOUTPLAYINCD-RCENTERFRONTSURROUNDSUBWOOFERRECOUTPLAYINCD2/TAPE2MONITORSL 16TEXTANTEAUDIO OUTGROUNDDo not plug in the receiver to AC power until you haveconnected all your devices.This section focuses on the connections from your turntable/record player to the VR-4090/VR-4080/KRF-V7773D. Pleaserefer to your turntable/record player’s instructions for moredetail about its connection jacks and capabilities.To Connect a Turntable/Record Player:1. Connect the audio cables from the turntable audio out-put jacks to the receiver’s PHONO R and L jacks.2. If your turntable includes a ground cable, connect theground cable to the receiver’s SIGNAL GND jack.3. Go to “Noting Your Devices” on page␣ 3 and note whichjacks you used to connect your turntable. In addition,note the brand name and model number of the turn-table.