38Chapter Two : Setting Up the Remote Control UnitRemote SetupSP DistanceMeasure the distance from each speaker to the seat you mostoften use. Note the distance in the table below:2. Set the distance of the L (left front) speaker using theor key.3. Press Next and set the distance of the next speaker (C =Center) speaker.4. Set the distances of all the speakers in the system.R: Front Right speakerRS: Right Surround speakerLS: Left Surround speakerSW: Subwoofer5. Press the Home key (LCD function key 2) to return tothe normal operation screen.Surround SetUpDistance = L9.0m/30ftHome Next1. In step 8 of the SP Level setting procedure above, selectNext (LCD function key 2).Identifying Components for Remote Control UnitAfter the speaker setup, it is required to make Remote Con-trol unit capable of identifying the devices it controls. Re-mote Control unit provided with the receiver can be usedin setup of any device. Even when a device is not listed inthe device codes in the Remote Control unit memory, theremote control function of the device can be programmedusing the Learn function.The Learn function can also be used to extend the remotecontrollable functions.For details, see “If a device cannot be remote controlled withany code in the list, or to add remote control target func-tions...” below.Registering a device1. Ensure that the batteries are loaded.3. Press the Setup key (LCD function key 2).4. Select “01. IR” using the or key, then press theEnter key (LCD function key 2).2. Press the Menu key (LCD function key 2).SpeakerLeft frontCenterRight frontRight surroundLeft surroundSubwooferDistance (m or ft)01.IR02.Surround03.ContrastHome EnterTunerFM 01ch87.50MHzMenuHome SetupPress the Music key or Movie key to display “Menu”.