Kenwood VR-6060 Instruction Manual

Also see for KRF-V8060D: Service manual Service manual Instruction manual Instruction manual

Contents

31 ENSurround playThe DTS compatible models can reproduce a CD, DVD, or LD carrying theDTS mark.DOLBY DIGITAL can be used when playing DVD or LD software bearingthe mark and DOLBY DIGITAL format digital broadcasts (etc.).DOLBY PRO LOGIC can be used when playing video, DVD, or LDsoftware bearing the mark.Circle Surronnd qenable you to listen to multi channel sound from thestereo source.INPUT SEL.INPUT MODESTEREO INPUT MODELISTEN MODEInput SelectorSTEREOLSTN.M UP/DOWNPreparations• Turn ON related components.• Complete “Preparing for surround sound” (speaker settings). ¡• Use the Input Selector keys to select the component you wish to playback with surround sound.• Use the INPUT MODE key to select the input mode (analog or digital)for the source you wish to play back. 9• Noise will be produced when a DTS source is played by selecting theanalog input.1Start playing the video software.2Turn the LISTEN MODE knob (press the LSTN. M UP/DOWNkeys) or STEREO key to select the listening mode.The listening mode settings are stored separately for each input. Ifthe input mode is set to digital auto (“AUTO DETECT” lights), thereceiver selects the optimal listening mode automatically based onthe type of input signal and the speaker settings.Each turn of the LISTEN MODE knob or press of the LSTN. M UP/DOWN keys switches the setting as listed below.The listening mode settings are different depending on the typeof input signal.When the DTS-ES (matrix or discrete) signal is input :1 DTS 5.1ch : (DTS indicator light up.)2 DTS MATRIX or DTS DISCRETE :(DTS MATRIX or DISCRETE indicator light up.)3 2ch DOWNMIXAmbience effects When the DOLBY DIGITAL signal is input :(The DOLBY DIGITAL or PRO LOGIC indicator lights up.)1 DOLBY DIGITAL : DOLBY DIGITAL surround.2 PL II MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)3 PL II MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)4 PRO LOGIC : PRO LOGIC II surround PRO LOGICmode.(The PRO LOGIC indicator lights up.)5 STEREO : Normal stereo playback.(The STEREO indicator lights up.)When you select DOLBY DIGITAL.“DOLBY DIGITAL” will be appear.DOLBY DIGITALPRO LOGICLSL S SB SRC RSWLFESP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETESTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECT THXAUTORDSRTYMEMOSTEREOTUNEDSurround EXWhen the DTS signal is input :(The DTS indicator lights up.)1 DTS : DTS surround.2 STEREO : Normal stereo playback.When the analog signal or the digital signal (except forDOLBY DIGITAL or DTS signal) is input :1 PL II MOVIE : PRO LOGIC II surround MOVIE mode.(The PRO LOGIC indicator lights up.)2 PL II MUSIC : PRO LOGIC II surround MUSIC mode.(The PRO LOGIC indicator lights up.)3 PRO LOGIC : PRO LOGIC II surround PRO LOGIC mode.(The PRO LOGIC indicator lights up.)4 NEO CINEMA : DTS-ES Surround NEO:6 mode.(The NEO:6 indicator lights up.)5 NEO MUSIC : DTS-ES Surround NEO:6 mode.(The NEO:6 indicator lights up.)6 CS II CINEMA: CS 5.1 surround.(The CS II indicator lights up.)7 CS II MUSIC : CS 5.1 surround.(The CS II indicator lights up.)8 STEREO : Normal stereo playback. Sound is produced.from the two front channels only.(The STEREO indicator lights up.)• Dolby Digital or DTS signal having more channels than the maxi-mum number of playback channels available using the receiver’scurrent settings is input, downmixing is performed to match thenumber of available channels.3DSP mode (Digital Signal Processor).DSP can produce these effects without spoiling the sound quality ofthe original music or video source.1 Pressing the DSP key or DSP MODE key will display thecurrent DSP MODE status.2 Each key press will switch to the next status as shown below :1 ARENA : DSP surround ARENA mode.2 JAZZ CLUB : DSP surround JAZZ CLUB mode.3 THEATER : DSP surround THEATER mode.4 STADIUM : DSP surround STADIUM mode.5 DISCO : DSP surround DISCO mode.6 DSP MODE OFF : DSP mode OFF.• The DSP mode selection is displayed for approximatly 6 seconds.• Fine adjusting the DSP effects on the receiver refer to 30 page.•VR609/29-35/EN 10/24/01, 10:38 PM31