6 ENLSL S SB SRC RSP MUTE OPTICAL 6CH INPUTCOAXIAL ANALOG 96kHzfsCINEMA EQ.ACTIVE EQ.DSP MODEDTS.MATRIXDISCRETEDOLBY DIGITALPRO LOGICSTEREOLOUDNESSNEO:6CSIIA B CLIPAUTO DETECTAUTORDSPTYMEMOSTEREOTUNEDSWLFELOUDNESS ACTIVE EQ CINEMA EQ DSP STEREO INPUT MODE DIMMERSOUND TONE SETUPBAND AUTO MEMORYMULTI CONTROL LISTEN MODETUNERMD/TAPEVIDEO3VIDEO2VIDEO1PHONOCD/DVDDSPDTSCSDOLBY DIGITALACTIVE EQCINEMA EQSTANDBYON/STANDBYA SPEAKERS BPOWERPHONESDOWNMUTEAV AUXS VIDEO VIDEO L-AUDIO-RUPVOLUME CONTROLON/STANDBYDVD/6CH-ON –OFFF ULL DIGITA LD E C O D I N GSTANDBYPOWERDisplaySpeaker selection indicatorsInput channel indicatorOutput channel indicatorAUTO indicatorMEMO indicatorSTEREO indicatorTUNED indicatorNames and functions of partsFrequency displayInput displayPreset channel displaySurround mode displaySpeakerindicator1 POWER ON/OFF key(For KRF-V8060D) ¡Use to turn the main power ON/OFF.2 ON/STANDBY ( ) key(For KRF-V8060D) ¡Use to turn the power ON/STANDBY whenthe POWER is turned ON.STANDBY indicator2 POWER and ON/STANDBY ( ) key(For VR-6060) ¡Use to turn the power ON/STANDBY.STANDBY indicator3 SPEAKERS A/B keys ¢Use to turn the A/B speakers ON/OFF.4 LOUDNESS key ∞Use to switch the status of LOUDNESS.5 ACTIVE EQ key ∞Use to switch the status of ACTIVE EQ.6 Surround indicatorsDSP indicator ⁄Lights when the receiver is in the DSP mode.ACTIVE EQ indicator ∞Lights when the receiver is in the ACTIVE EQmode.CINEMA EQ indicator ∞Lights when the receiver is in the CINEMAEQ mode.DOLBY DIGITAL indicator ⁄Lights when the receiver is in the DolbyDigital mode.Standby modeWhen the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under thecondition, the system can be turned ON by remote control unit.Main unit^ SOUND key ‹Use to adjust the sound quality and the ambi-ence effects.& BAND key ¶Use to select the broadcast band.* AUTO key ¶Use to select the auto or manual tuningmode.( TONE key ∞Use to switch the status of TONE control.) MEMORY key ¶Use to store radio stations in the presetmemory.¡ SETUP key ¡Use to select the speakers' settings etc.™ MMMMM/????? keys ¡Use for selection adjustments during TONE,SOUND, SETUP and PRESET CHANNELfunctions.£ MULTI CONTROL knob ¡Use to control a variety of settings.¢ LISTEN MODE knob ⁄Use to select the listening mode.∞ AV AUX (S VIDEO, VIDEO, AUDIO L/R)jacks *§ AV AUX key *Use to switch the input to AV AUX.DTS indicator ⁄Lights when the receiver is in the DTS mode.CS II indicator ⁄Lights when the receiver is in the CIRCLESURROUND mode.7 CINEMA EQ key ∞Use to switch the status of CINEMA EQ.8 DSP key ⁄Use to select any of the DSP mode.9 STEREO key ⁄Use to switch the status of STEREO.0 INPUT MODE key 9Use to switch between the digital and analoginputs (FULL AUTO = DIGITAL MANUAL =ANALOG = 6CH INPUT).! DIMMER keyUse to select the REC MODE. §Use to adjust the brightness of the display.›@ VOLUME CONTROL knob ¢# MUTE key ∞Use to temporarily mute the sound.$ PHONES jack ∞Use for headphone listening.% Input Selector keys ¢(DVD/6CH, CD/DVD, PHONO, TUNER,VIDEO1, VIDEO2, VIDEO3, MD/TAPE)Use to select input sources.MUTEindicator CLIPindicator Input modeindicator Listen modeindicatorFor VR-6060•VR609/01-09/EN new 10/24/01, 10:33 PM6