19 ENListening to a source component1Use the INPUT SELECTOR knob or Input Selector keys toselect the source you want to listen to.The input sources change as shown below:1 “TUNER”2 “CD/DVD”3 “TAPE” or “MD”4 “VIDEO1”5 “VIDEO2”6 “DVD/6CH” (VR-906/VR-905 : “DVD”)7 “AUX”2Start playback from the selected source.3Use the VOLUME CONTROL knob or VOLUME %/fikeys toadjust the volume.INPUT SELECTORVOLUME CONTROLInputSelectorVOLUME %/fiNormal playbackAdjusting the soundAdjusting the Tone (remote control only)You can adjust the sound quality when this model is in the PCM stereoand analog stereo mode.1 Press the TONE key to select the Tone mode.2 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys toselect TONE ON/OFF.3 When in TONE ON selection, press the TONE key for the followingdisplays.BASS : Select this to adjust the low frequency range.TREB : Select this to adjust the high frequency range.4 Use the MULTI CONTROL knob or MULTI CONTROL %/fi keys toadjust the sound quality.• The bass and treble levels are adjustable from -10 to +10 in 2 stepincrements.One-touch low frequency emphasis (Bass Boost)(remote control only)You can adjust the sound quality when this model is in the PCM stereoand analog stereo modes.Press the BASS BOOST key.• Press the key once to select the maximum (+10) low frequencyemphasis setting.• TONE will automatically be turned ON.• This key does not function when this model is in the sound qualityor ambience effects adjustment mode. £~•Switching back to the previous settingPress the BASS BOOST key again.VOLUME %/fiMUTEBASS BOOSTMULTICONTROLACTIVE EQVOLUME CONTROLPHONES MULTI CONTROLTONEACTIVE EQLOUDNESSSPEAKERS ON/OFFMUTE