Kenwood VR-905 Instruction Manual

Also see for KRF-V5090D: Instruction manual Service manual

32 ENFor your recordsRecord the serial number, found on the back of the unit, in the spacesdesignated on the warranty card, and in the space provided below. Referto the model and serial numbers whenever you call upon your dealer forinformation or service on this product.Model_____________________ Serial Number_____________________Specifications Caution : Read this page carefully to ensure safeoperation.For the U.S.A and CanadaAUDIO sectionRated power output during STEREO operationEffective power output during SURROUND operationFRONT (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)............................................................................... 100 W + 100 WCENTER (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven).............................................................................................. 100 WSURROUND (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channel driven)............................................................................... 100 W + 100 WSURROUND BACK (40 ~ 20 kHz, 0.7% T.H.D., at 8Ω one channeldriven) (VR-906) .................................................................. 100 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)Frequency response (IHF‘66)CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ................................................................................. 95 dBInput sensitivity / impedanceCD/DVD, DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2.............................................................................. 550 mV / 47 kΩOutput level / impedanceMD/TAPE REC ....................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)For other countriesAUDIO sectionRated power output during STEREO operationDIN/IEC (63 Hz ~ 12.5 kHz, 0.7 % T.H.D., at 8 ΩΩΩΩΩ)............................................................................... 100 W + 100 WEffective power output during STEREO operation(1 kHz, 10% T.H.D., at 8Ω) ....................................... 120 W + 120 WEffective power output during SURROUND operationFRONT(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .... 100 W + 100 W(1 kHz, 10% T.H.D., at 8Ω one channel driven) ..... 120 W + 120 WCENTER(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) ....................... 100 W(1 kHz, 10% T.H.D., at 8Ω one channel driven) ........................ 120 WSURROUND(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .... 100 W + 100 W(1 kHz, 10% T.H.D., at 8Ω one channel driven) ..... 120 W + 120 WSURROUND BACK (KRF-V6090D)(1 kHz, 0.7% T.H.D., at 8Ω one channel driven) .................... 100 W(1 kHz, 10% T.H.D,. at 8Ω one channel driven) ..................... 120 WTotal harmonic distortion ........................... 0.05% (1 kHz, 50 W, 8Ω)Frequency response (IHF‘66)CD/DVD ...................................... 20 Hz ~ 70 kHz, +0 dB, –3.0 dBSignal to noise ratio (IHF’66)CD/DVD ................................................................................. 95 dBInput sensitivity / impedanceCD/DVD, AUX, MD/TAPE, VIDEO 1, VIDEO 2 .... 550 mV / 47 kΩDVD/6CH INPUT .................................................. 550 mV / 15 kΩOutput level / impedanceMD/TAPE REC ....................................................... 550 mV / 1 kΩPRE OUT (SUBWOOFER) ...................................... 1.5 V / 2.2 kΩPRE OUT (SURROUND BACK) .............................. 1.5 V / 2.2 kΩTone controlBASS ................................................................ ±10 dB (at 100 Hz)TREBLE ............................................................ ±10 dB (at 10 kHz)Loudness controlVOLUME at -30dB level ................................... +8 dB (at 100 Hz)DIGITAL AUDIO sectionSampling frequency ...................... 32 kHz, 44.1 kHz, 48 kHz, 96 kHzInput level / impedance / wave lengthOptical ........................... (–15 dBm ~ –21 dBm), 660 nm ±30 nmCoaxial ................................................................... 0.5 Vp-p / 75 ΩVIDEO sectionVIDEO inputs / outputsVIDEO (composite) ................................................. 1 Vp-p / 75 ΩS-VIDEO inputs / outputs(KRF-V6090D)S-VIDEO (luminance signal) .................................. 1 Vp-p / 75 ΩS-VIDEO (chrominance signal) ....................... 0.286 Vp-p / 75 ΩCOMPONENT VIDEO inputs/outputs (except for VR-905)COMPONENT VIDEO (luminance signal) ............. 1 Vp-p / 75 ΩCOMPONENT VIDEO (CB/CR-signal)VR-906 ......................................................... 0.64 Vp-p / 75 ΩKRF-V6090D/KRF-V5090D ........................... 0.7 Vp-p / 75 ΩFM tuner sectionTuning frequency range ................................. 87.5 MHz ~ 108.0 MHzUsable sensitivity (MONO)VR-906/VR-905................. 1.3 μV (75 Ω)/ 13.2 dBf (75 kHz DEV., SINAD 30 dB)KRF-V6090D/KRF-V5090D................... 1.6 μV (75 Ω)/ 15.2 dBf (75 kHz DEV., SINAD 30 dB)50dB quieting sensitivitySTEREO ..................................................... 28 μV (75 Ω)/ 40.2 dBfTotal harmonic distortion (1 kHz)MONO .......................................................... 0.5% (71.2 dBf input)STEREO ....................................................... 0.7% (71.2 dBf input)Signal to noise ratio (1 kHz, 75 kHz DEV.)MONO ........................................................ 75 dB (71.2 dBf input)STEREO ..................................................... 68 dB (71.2 dBf input)Stereo separation (1 kHz) ........................................................... 40 dBSelectivity (±400 kHz) VR-906/VR-905 ...................................... 70 dBKRF-V6090D/KRF-V5090D .................... 50 dBFrequency response .................... (30 Hz ~ 15kHz), +0.5 dB, –3.0 dBAM tuner sectionTuning frequency range10 kHz step (VR-906-VR-905) ..................... 530 kHz ~ 1,700 kHz10 kHz step (KRF-V6090D/KRF-V5090D) ....... 530 kHz ~ 1,610 kHz9 kHz step (KRF-V6090D/KRF-V5090D) ......... 531 kHz ~ 1,602 kHzUsable sensitivity (30% mod., S/N 20 dB) (VR-906/VR-905)........................................................................ 16 μV / (600 μV/m)Usable sensitivity (KRF-V6090D/KRF-V5090D) ....... 16 μV / (600 μV/m)Signal to noise ratio (30% mod. 1 mV input).......................................................... 50 dB (60 dBμV EMF input)GENERALPower consumptionVR-906/VR-905 .................................................................... 2.2 AKRF-V6090D/KRF-V5090D .................................................. 280 WStandby Power consumptionVR-906/VR-905 .................................................. less than 0.4 WKRF-V6090D/KRF-V5090D .................................. less than 1.3 WAC outletSWITCHEDVR-906/VR-905 .................................. (total 150 W, 1.25 A max.)KRF-V6090D/KRF-V5090D .............................. (total 90 W max.)Dimensions .................................................... W : . 440 mm (17-5/16")H : 143 mm (5-5/8")D : 303 mm (11-15/16")Weight (Net)VR-906/VR-905 ..................................................... 7.7 kg (17.0 lb)KRF-V6090D/KRF-V5090D ................................... 8.8 kg (19.4 lb)Notes1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice.2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).100 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)100 watts per channel minimum RMS, both channels driven, at 8Ω from40 Hz to 20 kHz with no more than 0.7% total harmonic distortion. (FTC)

/ 32

Related manuals for Kenwood KRF-V5090D