Kenwood VR-905 Instruction Manual

Also see for KRF-V5090D: Instruction manual Service manual

20 ENRecording audio (analog sources)Recording a music source1 Use the INPUT SELECTOR knob to select the source (other than“MD/TAPE”) you want to record.2 Set the MD or TAPE recorder to record.3 Start playback, then start recording.Recording video1 Use the INPUT SELECTOR knob to select the video source (otherthan “VIDEO1”) you want to record.2 Set the video deck connected to VIDEO 1 to record.• Select the REC mode to record a digital input source.3 Start playback, then start recording.• Recording may not be normal for some video software. This is due tothe copy guard condition. ºRecording audio (digital sources)Switch on the REC mode to record a digital input source.Usually use the A-REC (Auto-Record) mode to record audio inputsources. When the digital mode changes during recording in the A-RECmode, the audio input source may be interrupted momentarily.Recording music in A-REC or M-REC modeINPUT SELECTORDIMMER1 Use the INPUT SELECTOR knob to select the source (CD/DVD,DVD/6CH (KRF-V6090D/KRF-V5090D), DVD (VR-906/VR-905) orVIDEO2) you want to record.2 Set the MD or TAPE recorder to record.INPUT SELECTORNormal playbackAdjusting the Loudness mode (remote control only)You can adjust the Loudness function which controls the low volumesettings to maintain the music’s richness. The adjustment can be madewhen this model is in the PCM stereo and analog stereo mode.Press the LOUDNESS key to turn the Loudness setting ON.To cancelPress the LOUDNESS key again so that the “LOUDNESS” indicatorgoes off.Muting the soundThe MUTE key lets you mute the sound of the speakers.Press the MUTE key.To cancelPress the MUTE key again so that the “MUTE” indicator goes off.• MUTE ON can also be deactivated by turning the volume controlknob.ACTIVE EQ modeYou can enjoy a more impressive sound effect when ACTIVE EQ isturned ON during Dolby Digital and DTS playback and, when in PCM andanalog stereo mode.Press the ACTIVE EQ key for the following selections;1 ACTIVE EQ MUSIC : Effective when listening to music.(The ACTIVE EQ LED indicator lights up.)2 ACTIVE EQ CINEMA : Effective when watching a movie.(The ACTIVE EQ LED indicator lights up.)3 ACTIVE EQ TV : Effective when watching TV.(The ACTIVE EQ LED indicator lights up.)4 ACTIVE EQ OFF : The ACTIVE EQ function is turned OFF.(The ACTIVE EQ LED indicator goes off.)• ACTIVE EQ function will not be available when REC MODE, AUTOTUNING or PRESET MEMORY is ON and during 96kHz LPCMplayback.Listening with headphones1 Press the SPEAKERS ON/OFF key so that the speaker indicatorgoes off.• If you turn off all of the speakers when in surround mode, thesurround mode will be canceled as well, resulting in stereo playback.2 Connect headphones to the PHONES jack.PHONES3 Use the VOLUME CONTROL knob or VOLUME %/fi keys toadjust the volume.Make sure the SP indicator is turned OFF.Recording