Kenwood VRS-6100 Instruction Manual

Also see for VRS-6100: Instruction manual Service manual Service manual

23 ENNormal playbackAdjusting the soundVOLUME CONTROLPHONES MULTI CONTROL @/#ACTIVE EQACTIVE EQVOLUMEMUTEBASS BOOSTMULTICONTROL %/fiTONELOUDNESSAdjusting the TONE (PCM stereo and analog stereo mode only)1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the TONE key to select the TONE mode.3 Use the MULTI CONTROL button (or the MULTICONTROL %/fi keys) to select "TONE ON" or "TONE OFF"T O OEN N4 When in "TONE ON" selection, press the TONE key for thefollowing displays.1 "BASS" :Select this to adjust the low frequency range.2 "TREBLE" :Select this to adjust the high frequency range.5 Use the MULTI CONTROL button (or the MULTICONTROL %/fi keys) to adjust the sound quality.T R 1ELBE )6 Repeat steps 4 and 5 as required.÷ The bass and treble levels are adjustable from -10 to +10 in2 step increments.÷ The adjustment item is displayed for approximately 20 seconds.7 Press the TONE key again to return to the input indication.÷ The TONE key is defeated during tone adjustment in theSOUND mode (¤,‹) or when the listen mode isswitched to a mode other than the stereo mode.One-touch low frequency emphasis (Bass Boost)(PCM stereo and analog stereo mode only)You can adjust the sound quality when this model is in the PCM stereoand analog stereo modes.1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the BASS BOOST key.÷ Press the key once to select the maximum (+10) low fre-quency emphasis setting.÷ TONE mode will automatically be turned ON.÷ The BASS BOOST key is defeated during tone adjustment inthe SOUND mode (¤,‹) or when the listen mode isswitched to a mode other than the stereo mode.Switching back to the previous settingPress the BASS BOOST key.Adjusting the LOUDNESS mode(PCM stereo and analog stereo mode only)You can adjust the Loudness function which controls the low volumesettings to maintain the music's richness.1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the LOUDNESS key to turn the LOUDNESS settingON.To cancelPress the LOUDNESS key again.ACTIVE EQ modeYou can enjoy a more impressive sound effect when ACTIVE EQ isturned ON.Press the ACTIVE EQ key for the following selections:1 EQ MUSIC : (The "ACTIVE EQ" indicator lights up)Effective when listening to music.2 EQ CINEMA : (The "ACTIVE EQ" indicator lights up)Effective when watching a movie.3 EQ GAME : (The "ACTIVE EQ" indicator lights up)Effective when playing a game.4 EQ OFF : (The "ACTIVE EQ" indicator goes offThe ACTIVE EQ function is turned OFF.÷ ACTIVE EQ function will not be available when REC MODE,AUTO TUNING or PRESET MEMORY is ON and during 96kHzLPCM playback.Lights up