Kenwood VRS-6100 Instruction Manual

Also see for VRS-6100: Instruction manual Service manual Service manual

32 ENMULTICONTROL @ / #INPUT SELECTORMULTI CONTROL% / fiSOUND1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the SOUND key until the desired item appears inthe display.Each time you press the button, the menu changes as follows:Note that some items are not displayed depending on speakersettings and listening mode.1 "C": *1Center speaker level adjustment2 "RS":*1Right surround speaker level adjustment3 "RB": *1Surround back right speaker level adjustment4 "LB": *1Surround back left speaker level adjustment5 "LS": *1Left surround speaker level adjustment6 "SW": *1Subwoofer level adjustment7 INPUT : (Analog mode only) ¡Input level adjustment8 NIGHT : *2 ‹Midnight mode adjustment9 PANORAMA": *3Panorama mode ON/OFF0 DIMENSION": *3Dimension adjustment- CENTER WIDTH": *3 ‹Center width adjustment*1 The setting in the SOUND mode is temporary. It returnsautomatically to the original level set in "Speaker settings"when the receiver is turned OFF/ON.*2 DOLBY DIGITAL, DTS mode only*3 Only when the input signal is a 2-channel signal in the DOLBYPRO LOGIC IIx MUSIC or DOLBY PRO LOGIC II MUSIC mode.3 Use the MULTI CONTROL button (or the MULTI CONTROL%/fi keys) to adjust the setting as desired.÷ The adjustment item is displayed for approximately 20 seconds.4 Press the SOUND key to advance to the next setting item.You can make further adjustments to the sound while listening toplayback in the surround mode.Adjusting the SOUNDPanorama mode(Only when the input signal is a 2-channel signal in the DOLBY PROLOGIC IIx MUSIC or DOLBY PRO LOGIC IIMUSIC mode)When listening to music, you will be able to enjoy the "wraparound"sound effect when you adjust the panorama mode.1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the SOUND key repeatedly until the "PANORAMA"indication appears.3 Use the MULTI CONTROL button (or the MULTI CONTROL% / fi keys) to select PANORAMA mode "ON" or "OFF".O NDimension mode(Only when the input signal is a 2-channel signal in the DOLBY PROLOGIC IIx MUSIC or DOLBY PRO LOGIC IIMUSIC mode)When listening to music with certain recordings, you will also be able toachieve a suitable balance from all the speakers by adjusting thedimension mode.1 Press the RECEIVER key on the remote control unit to setit to the receiver control mode.2 Press the SOUND key repeatedly until the "DIMENSION"indication appears.3 Use the MULTI CONTROL button (or the MULTI CONTROL%/fi keys) to adjust the soundfield towards the rear orthe front.Soundfield is adjusted towards the front.R F↓Standard setting.R F↓Soundfield is adjusted towards the rear.R FConvenient functions