Kenwood XD-500 Instruction Manual

Also see for XD-500: Instruction manual Instruction manual Instruction manual Instruction manual

Kenwood XD-500 Instruction Manual Manual pdf 11 page image

XD-750/700/550/500 (En)1 1Preparation sectionBasic sectionApplication sectionKnowledge sectionsControls and indicatorsReceiver1 ON/STANDBY ( ) key ^Power ON/OFF switching is executed.2 RESET key YPress to reset the microcomputer built in the system.3 MIC MIX. knob oAt the time of mic mixing , this knob controls the volumes of themicrophones.4 MIC 1, MIC 2 terminal oFor connection of a microphone (optional).5 HIT MASTER key oUsed in karaoke singing, etc.6 BEST HITS key &rWhen power is ON: Records the first tracks of all of the CDsstored in the unit.When power is STANDBY: Switches the auto power-save mode onand off.7 EX. BASS (Extra bass) key &WWhen power is ON: Switches the extra bass play on andoff.When power is STANDBY: Used in the timer setting operation.8 DISPLAY @9 SRS 3D key/Indicator (XD-750/XD-700) iEWhen power is ON: Switches the SRS 3D play on and off.When power is STANDBY: Used in the timer setting operation.SOURCE DIRECT key/Indicator (XD-550, XD-500)iEWhen power is ON: Press to turn the Source Direct play onand off.When power is STANDBY: Used in timer setting operations.0 DISP. /DEMO key yWhen power is ON: Switches the displayed information.Switches the demonstration on andoff.When power is STANDBY: Switches the demonstration on andoff.! ENTER key ∞ pUsed for time setting, timer setting, etc.@ MODE key tQWhen power is ON: This key switches the function of theMULTI CONTROL/VOLUME knob.The items which can be selected differaccording to the status at that time.When power is STANDBY: This key is used in the OTT timer set-ting.# Equalizer operation keys yuThe equalizer effect is switched ON/OFF and the type of equalizereffect is selected.$ MULTI CONTROL/VOLUME knob ^Normally this is used for volume adjustment. Depending on thepurpose, the function can be switched with the MODE key.% PHONES terminal &For connection of a headphone (optional).^ INPUT key ^Press to select the input source. When TAPE or CD is selected,playback starts automatically provided that a tape or disc has alreadybeen loaded.& Tuner operation keys ¢AUTO keyWhen power is ON: Switches the tuning mode.When power is STANDBY: Used in the clock adjustment.TUNING keysPress to select a radio station.BAND keyPress to switch the receiving band.Cassette deck unit* A deck cassette holderPress the area marked PUSH OPEN to load or eject a tape.( O.T.E. key ‚When this key is pressed during CD playback, only the title beingplayed at that time will be recorded on tape. When this key is pressedduring stop, the CD selected at that time will be recorded on tapefrom the first title onward.) DOLBY NR key ¡Dolby noise reduction ON/OFF switching is executed.¡ REV. MODE key ¡The reverse mode of the deck (both sides, repeated, one side) isswitched.™ REC/ARM key ¶Press to start recording. Pressing the key during recording stops itafter leaving a non-recorded space (blank) of about 4 seconds.£ DUBBING key ªThe contents of the tape of the A deck are copied to the tape of theB deck.¢ B deck cassette holderPress the area marked PUSH OPEN to load or eject a tape.∞ Cassette deck operation keysPlay (2 3) keysStop (7) keyFast forward and rewind (1 ¡) keys§ A/B key )•Press to select the deck to be operated. Used as the beat cancel keyduring recording of AM broadcasting.CD player unit¶ DISC SELECTOR key (The disc for playback (or recording) is selected.• TIME DISP. (Time display) key *Press to switch the CD time display information.ª Disc tray *Three discs can be stored.º OPEN/CLOSE (0) key *The disc tray is opened and closed.⁄ DISC SKIP key (The disc for playback (or recording) is selected. This is also used forinsertion of a CD to the inside of the disc tray.¤ CD operation keys *Play/pause (6) keyStop (7) keySkip (4 ¢) keys