Kenwood XD-500 Instruction Manual

Also see for XD-500: Instruction manual Instruction manual Instruction manual Instruction manual

Kenwood XD-500 Instruction Manual Manual pdf 51 page image

XD-750/700/550/500 (En)5 1Preparation sectionBasic sectionApplication sectionKnowledge sectionsTimer operationAdjust the clock before setting the timer.Operate easy To use Timer (O.T.T.)Playback of the selected input source starts at the specified time, and the power is switched off after one hour. This timeroperates only once directly after setting.Sleep timer (SLEEP)The power is turned OFF automatically after the specified period has elapsed.Timer playback, timer recording (PROG.1, PROG.2)With each of the two timer programs, a selected source can be played (or radio broadcast can be recorded) in the previously settime period.AI timer playback (PROG.1, PROG.2)When timer playback starts, the volume increases gradually.Operate easy To use Timer (Operate easy To use Timer : O.T.T.)Sleep timer (SLEEP)Set the number of minutes after which the power is to be turned OFF.2 Set the time.Adjust the clock before setting the timer.1 Turn the power ON.SLEEPLightsTUNED STEREOAUTO SLEEPECHOSLEEP EQ.CLASSICMANUALPOPROCKVOL.SLEEPs L E E P 9 )EX.BASSDuration for sleep timerTimer playback can be set with a simple operation of just setting the time. With this function, the last source selected beforeturning power off can be played by the timer. The power turned ON by the timer is switched off automatically in an hour afterthe timer playback starts.÷ The power is turned OFF automatically after the set time has elapsed.÷ Each press decreases the time by 10 minutes. The maximum time thatcan be set is 90 minutes.Turn the power OFF or press the SLEEP key until the sleeptime is cancelled.To cancel90=80=70...30=20=10=Cancel=90=80...A M 7 ) ):O.T.T.1 Select the desired source and adjustthe volume.2 Switch OFF the power supply.3 Press the MODE key.The program timer does not operate until O.T.T. operationhas ended.At the time of tape playback by timer operation, the B deckhas priority.÷ The ON time can be set in steps of 5 minutes.Blinks ON time displayMODE÷ When the MODE key is pressed, the input source will be displayed, andafter a few seconds, the ON time will be displayed.4 Set the ON time. The time isadvanced.5 Press the ENTER key.ENTERPress the MODE key twice while the power is OFF.To cancelThe time isreturned.DOWNUPUP MULTI CONTROL/VOLUME