Kenwood XD-500 Instruction Manual

Also see for XD-500: Instruction manual Instruction manual Instruction manual Instruction manual

Kenwood XD-500 Instruction Manual Manual pdf 21 page image

XD-750/700/550/500 (En)2 1Preparation sectionBasic sectionApplication sectionKnowledge sectionsECHOT A P E ) ) ) )EX.BASSEQ.CLASSICMANUALPOPROCKVOL.REV.MODEBDOLBY NRDOLBY NRRUNNINGINDICATORSelection of DOLBY NR (Noise Reduction)To stop playbackSelection of reverse mode.To wind tape at high speed÷ If the tape transport direction is opposite to the desired direction, pressthe play key corresponding to this.To fast wind in direction \Transport direction indicatorsThe 2 and 3 indicators indicate the current direction in whichthe tape advances when playback or recording is started auto-matically by the easy operation function, etc. This direction isthe direction stored in memory when the tape was last stopped.(To switch the tape transport direction, press the play key cor-responding to the desired direction then press the stop (7) key.)The Dolby NR system minimizes the hiss noise heard whenplaying tape. When playing a tape prerecorded with DolbyNR ON, be sure to set the DOLBY NR ON for playback.Please play back tapes recorded with equalizer etc. withoutapplying any effect.NoteNoteLet's put out some sound3 ¡721To fast wind in direction |÷ Press the 7 key to stop fast winding.Each press switches the modes as follows.1 “[” ... Both sides are played back (recorded), andthen the tape stops.2 “”” .. Both sides are played back endlessly.(The tape stops after recording onto bothsides.)3 ““” .. Only one side is played back (recorded),and then the tape stops.REV. MODE÷ Select the Dolby NR mode according to the recording condition ofthe tape.ECHOT A P E ) ) ) )EX.BASSEQ.CLASSICMANUALPOPROCKVOL.REV.MODEBDOLBY NRRUNNINGINDICATORECHOT A P E ) ) ) )EX.BASSEQ.CLASSICMANUALPOPROCKVOL.REV.MODEBDOLBY NRDOLBY NRRUNNINGINDICATORDOLBY NR indicationReverse mode indicationTransport direction indicators÷ Normal (TYPE ), high (TYPE ), or metal (TYPE ) tape selection isset automatically.÷ Remove tape slack before loading.÷ Close the door securely.7÷ Do not take out the cassette tape until the tape transport hasstopped completely.Displays the selected deck.Displayed when the deck is loaded with a tape.Lit when “DOLBY NR” is ON.DOLBY NR ECHOT A P EEX.BASSBDOLBY NRDOLBY NREach press switches the modes as follows.1 “DOLBY NR” ON .......... DOLBY NR is used.2 “DOLBY NR” OFF ......... DOLBY NR is not used.