XD-750/700/550/500 (En)5 2Preparation sectionBasic sectionApplication sectionKnowledge sectionsAdjust the clock before setting the timer.Set the POWER switch to OFF (STANDBY) position.Adjust the listening volume.Make preparations for the play (recording).÷ When recording radio, the listening volume is automatically set to theminimum volume at the moment the power is turned ON by the timer.÷ To listen to CDInsert a disc.(Program playback is notpossible.)÷ To listen to tapeSet a tape into deck B.÷ Playing the auxiliary inputsourceMake timer setting ofthe component con-nected to the AUX jacks.÷ For recordingMake prepara-tions for record-ing. §............................................................................................................................................................................................................................................................................................÷ To listen to radioThe station should bepreset prior to theabove. ∞Select the disc to be played(1, 2 or 3).÷ Timer reservation is possible for the two types PROG.1 and PROG. 2at the same time.÷ Please make reservations with an interval of at least one minute, so thatthe operation times of PROG. 1 and PROG. 2 do not overlap.Timer programmingTwo 24-hour timer systems (PROG.1, PROG.2) (which can be used every day) and a sleep timer system (which works onlyonce) are available.In each of PROG.1 and PROG.2, the timer data including the operating period and played contents can be set and selected tobe activated or not as required.123Adjust the clock before setting the timer.The B deck has priority atthe time of timer playback.ATimer operationSelect a program No.4 ÷ The selected program No. lights.÷ If a program No. under which a timer program has already beenreserved, it is replaced by the new timer program.1DOWNUPUP MULTI CONTROL/VOLUMEON/STANDBY2Within 8 seconds!ENTERPROG.A M 1 ) ) )1:Each press of the key switches the program numbers as follows.1 PROG.1 ....... Program 12 PROG.2 ....... Program 23 Normal operationEX.BASS