Kenwood XD-552 Instruction Manual

Contents

Kenwood XD-552 Instruction Manual Manual pdf 24 page image

XD-SERIES (En)24Basic sectionA tip for use of the tape counterThe tape counter is set to “0000” when a cassette tapeis loaded. By writing down the counter reading in caseyou want to interrupt recording (playback) in themiddle of the tape, the memo will be helpful as a ref-erence for locating the same position when continu-ing the recording (playback) the next time. The tapecounter figure decrements during recording or play-back of the back side (while the 2 tape transport in-dicator is lit).To set the tape counter to “0000”, open the cassetteholder once. Then the counter will be reset.T 0A P E 0 0 0Let's put out some soundRelay play÷ Relay play is not possible in the reverse modes “ ”and “ ”.÷ If a tape is loaded only in either deck, playback stopsafter having played both sides of the tape.When tapes are set in the decks A and B and the re-verse mode is set to “ ” (play of both sides), play ofthe second deck will be started automatically afterplay of the first deck has been completed. Tape playwill be repeated alternately.AA