Kenwood XD-552 Instruction Manual

Contents

Kenwood XD-552 Instruction Manual Manual pdf 28 page image

XD-SERIES (En)28Basic section1. Load a cassette tape.(Recording is available on deck B only.)2. Select the tape transport direction.Let's recordRecording on TAPE1 Open the door of deck B.2 Insert a tape.3 Close the door.1 Select deck B by pressing theA/B key.2 Press the play key correspond-ing to the desired direction.3 Stop playback (by pressing the& key).To reverse the transport direction÷ When recording is started, thetape is transported in the directionselected in this step.÷ Wind the tape to the positionwhere recording is to be started.Check the tape transport direction indicator. £3. Set the recording condition.1 Select the reverse mode. ª2 Select the DOLBY NR mode. (XD-5...series only) ª0PUSHOPEN11A& ¡# ¡#22÷ The Tape Equalizer cannot be used in recording. (XD-4...series only)When equalizer or another effect is appliedto the sound, the sound with the appliedeffect can be recorded. iNote that this cassette deck cannot record ontoMetal tapes.NoteNoteNoteREV. MODE DOLBY NR33÷ Differentiation between normal(TYPE ) and high (TYPE ) tape isset automatically.÷ Remove tape slack before load-ing.R D S1155334422