Kenwood XD-A83 Instruction Manual

Also see for XD-803: Instruction manual

Contents

Kenwood XD-A83 Instruction Manual Manual pdf 22 page image

22Basic sectionLet's have sound1. Load a cassette tape.2. Select the deck to be used for playback.Tape playback1 Open the cassette holder.2 Insert a tape and close thedoor.To stop playback (STOP 7)To stop playback(7 STOP)Selection of TapeEqualizer(TAPE EQ.)Selection of reverse mode(REVERSE MODE)Start playback(TAPE A 2 3)(TAPE B 2 3)÷ Each time you press the TAPE A or TAPE B key, the direction changes.When the power is off:By loading a tape in the cassette deck to be used inplayback beforehand, simply pressing the play key auto-matically turns the power ON and starts playback.PUSHOPEN11 AAThe selected deck (A or B) starts playback.22To wind tapeat high speed(MULTI CON-TROL jog dial)112211÷ Since tapes that are longer than 100 minutes are verythin, the tape could adhere to the pinch roller or beeasily cut. It is recommended that these tapes not beused with this unit to prevent possible damage.