50Application sectionEffective sound adjustmentSwitching the AUX InputDSP modeThe DSP mode lets you add the atmosphere of a live con-cert or hall to PCM or analog of program source. Thesemodes are particularly effective when used with stereoprogram sources, like CD, television, and FM radio. Youmight enjoy trying the Hall, Disco, Church, Live mode thenext time you watch a concert or sporting event! Super woofer*Center speakerSurround speakersFront speakersSurround functionWhen playing the source component connected to the AUX jacks (2ch.) or that connected to the 6CH.INPUT jacks (DVD, VIDEO,etc), it is required to switch the AUX input.With “6ch. Input”, the audio from the surround L/R channels becomes monaural.Headphone listening :With “6ch. Input”, intended effects cannot beobtained through headphones. When usingheadphones, be sure to set the source compo-nent to the 2ch output setting.Tape recording :With “6ch. Input”, correct recording is not pos-sible on tape. When recording a 6CH. INPUTsource on tape, be sure to set the source com-ponent to the 2ch output setting.NotesNotes“DVD(2ch.)” .... (For U.K. and Europe : “DVD”)“6ch. Input” ..... (Except for U.K. and Europe)÷ Press and hold the DVD/VIDEO key for more than2 seconds. This switches the lighted indicator be-tween “DVD (2ch.)” and “VIDEO”.Each press switches the modes as follows.