Kenwood XD-A83 Instruction Manual

Also see for XD-803: Instruction manual

Contents

Kenwood XD-A83 Instruction Manual Manual pdf 29 page image

29Basic sectionLet's record4. Select the source to be recorded.The input source component tobe recorded should be displayed.÷ If a disc has already been loaded when the CD input is selected, it will startsto play automatically. In this case, press the stop (7) key to stop it.÷ When you select DVD/VIDEO (External input), adjust the input level. tSelect an input source otherthan “TAPE A or B”.1 Start recording.2 Play (or tune) the input source to be recorded.5. Start recording.÷ If a disc has already been loadedwhen the CD input is selected, itwill starts recording automatically.÷ Even if deck A is selected, it isautomatically switched to deck Bat the start of recording.÷ Recording stops automaticallywhen the tape side(s) to be re-corded have been fully recorded.÷ Press the stop (7) key of the cas-sette deck unit to stop recording(see the next page).LightsTo pause recording (Main unit only)÷ Pressing the key pauses recording after leaving anon-recorded space of about 4 seconds.÷ If the key is pressed again in less than 4 seconds after ithas been pressed, recording resumes from that instant.Each press switches the modes as follows.1 “ ” .... Recording stops after having re-corded both sides of tape.2 “ ” ... Recording stops after having re-corded both sides of tape.3 “ ” ..... Recording stops after having re-corded one side of tape.Selection of the reverse modeLights÷ When the “2” transport direction indicator is lit,recording always stops after having recorded oneside of tape.REVERSEMODEREC/ARM44Press the desired key.REC/ARM55C 2D 0 1 1 : 1T.EQA BT.EQA B