Kenwood XXV-01D Instruction Manual

Also see for XXV-01D: Instruction manual Service manual

50 | EnglishMenu systemIn FM receptionCRSC (Clean Reception SystemCircuit)Temporarily have reception alternate fromstereo to mono to reduce multi-path noise whenlistening to the FM station.Display Setting"CRSC: ON" The CRSC is ON."CRSC: OFF" The CRSC is OFF.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turnedON. In such a situation, turn it OFF.In HD Radio modeReceive mode SettingSets the receive mode.1 Select the Receive modePush the Control knob towards [4] or[¢].Select the "Receive Mode" display.2 Enter Receive modePress the Control knob for at least 1 second.3 Set the Receive modePush the Control knob towards [FM] or [AM].Each time you push the knob, the Receive modealternates between the modes shown in thetable below.Receive mode Display OperationAuto mode "Auto" Analog broadcasts and digitalbroadcasts will be switchedautomatically.When both are being transmitted,the digital broadcast will havepriority.Digital "Digital" Digital broadcasts only.Analog "Analog" Analog broadcasts only.4 Exit Receive modePress the [MENU] button.• Even if the Receive mode is set to "Auto", when theBall game mode program (non-delayed broadcastprogram) is received, the Receive mode willautomatically switch to Analog broadcast only.In SIRIUS tuner sourceSIRIUS ID (ESN) displayDisplaying the SIRIUS ID (Electronic SerialNumber)Display"ESN = ************"• Serial & SIRIUS ID (ESN)It is important to retain the unit serial number andthe electronic SIRIUS Identification number for serviceactivation and potential service changes.Auxiliary Input Display Setting &Station/Disc NamingSelecting the display when changing to Auxiliaryinput source. For the Station/Disc Naming refer tothe (page28).1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX"/ "AUX EXT" display.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Auxiliary input display setting modePush the Control knob towards [4] or[¢].Select the "Name Set" display.4 Enter Auxiliary input display setting modePress the Control knob for at least 1 second.The presently selected Auxiliary input display isdisplayed.5 Select the Auxiliary input displayPush the Control knob towards [4] or[¢].Each time you press the button, the displayalternates as listed below.