Kenwood XXV-01D Instruction Manual

Also see for XXV-01D: Instruction manual Service manual

English | 59Installation• Make sure that the unit is installed securely in place. Ifthe unit is unstable, it may malfunction (for example, thesound may skip).non-Japanese cars Japanese cars1 Refer to the section frame> (page 61) and then remove the hardrubber frame.2 Align the holes in the unit (two locations on eachside) with the vehicle mounting bracket andsecure the unit with the accessory screws.• During installation, do not use any screws except forthose provided. The use of different screws might resultin damage to the main unit.• Damage may occur if a screwdriver or similar tool is usedwith excessive force during the installations.Firewall or metal supportScrew (M4X8)(commercially available)Self-tapping screw(commercially available)Metal mounting strap(commercially available)Bend the tabs of themounting sleeve with ascrewdriver or similar utensiland attach it in place.8 mmMAX.M5mm M5mm8 mmMAX.TN TNT/NT: Toyota carsN: Nissan carsAccessory3 ...for Nissan carAccessory4 ...for Toyota car3 4