Kenwood eXcelon KDC-X789 Instruction Manual

Also see for KDC-MP628: Service manual Service manual

16 | EnglishGeneral featuresEqualizer Control1 Select the source for adjustmentPress the [SRC] button.2 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "EQ"/"SYS.Q"is displayed above the [3] (KDC-X889/MP828)/[1](KDC-MP7028/MP728/X789/MP628) button.Refer to (page 9).3 Enter Equalizer Control modePress the [3] ("EQ")/[1] ("SYS.Q") button.• When "2 ZONE" of

you cannnot select "EQ". (KDC-X889/MP828 only)4 Select the Equalizer Control item foradjustmentPress the [1] — [3]/[5] button.Multi-function key operation Equalizer Control Item[1] "SYS.Q" System Q Setting[2] "F"* Equalizer Front Setting[3] "R"* Equalizer Rear Setting[5] "Preset"* [1] "CALL"[2] "MEM"Call modeMemory mode• * Function of the KDC-X889/MP828• "Preset": You can store an adjusted equalizer controlvalue by selecting "MEM". Refer to mode> (page 18). Also, you can recall it byselecting "CALL". Refer to mode> (page 18).5 Adjust the Equalizer control itemSystem Q Setting (Sound Type)Push the Control knob to [4] or [¢].Each time the knob is pushed, the settingswitches as shown below.KDC-X889/MP828 KDC-MP7028/MP728/X789/MP628Sound setting Display Sound setting DisplayUser memory "USER" User memory "USER"Natural "NATURAL" Rock "ROCK"Rock "ROCK" Pops "POPS"Pops "POPS" Easy "EASY"Easy "EASY" Top 40 "TOP 40"Top 40 "TOP 40" Jazz "JAZZ"Jazz "JAZZ" Natural "NATURAL"• User memory:The values set on the

• Each setting value is changed with the Setting> (KDC-MP7028/MP728/X789/MP628) (page13) / (KDC-X889/MP828) (page 15).First, select the speaker type with the Speaker setting.Equalizer Front Setting/Equalizer Rear Setting (KDC-X889/MP828only)1 Select a frequency band you wish to adjustPress the [2] ("F") or [3] ("R") button.Each time the button is pressed, it switchesbetween "Band 1" and "Band 4".2 Select the adjustment items for Equalizer.Push the Control knob to [FM] or [AM].Each time the button is pressed, the items thatcan be adjusted switch as shown below.3 Adjust the Equalizer.Push the Control knob to [4] or [¢].Each time the knob is pushed, the settingswitches as shown below.Equarizer adjustment item RangeEqualizer Front Frequency/Equalizer Rear FrequencyRefer to the followings.Equalizer Front Level/Equalizer Rear Level–9 — +9Equalizer Front Quality/Equalizer Rear Quality0.25/ 0.50/ 1.00/ 2.00• The frequency which can be selected by eachFrequency band is shown below.Band FrequencyBand1 60/ 80/ 100/ 120/ 160/ 200 (Hz)Band2 250/ 315/ 400/ 500/ 630/ 800 (Hz)/ 1 (kHz)Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz)Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz)• To get the best sound, first set the Cabin Settingand Speaker Select Front/Rear parameters using the (page 15).6 Exit Equalizer Control mode(KDC-X889/MP828 only)Press the [6] ("RTN") button.