42 | EnglishMenu systemIn Standby modeSecurity CodeBecause authorization by the Security Code isrequired when it’s removed from the vehicle,personalizing this unit is by using the SecurityCode is a help in preventing theft.• The setup Security Code can be done when the (page 50) is set as OFF.• When the Security Code function is activated, the codecan’t be changed and the function can’t be released.Note, the Security Code can be set as the 4 digit numberof your choice.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Menu modePress the [MENU] button for at least 1 second.When "Menu" is displayed, "Security" is displayed.3 Enter Security Code modePress the Control knob for at least 1 second.When "Enter" is displayed, "Security" is displayed.4 Select the digits to enterPush the Control knob to [4] or [¢].5 Select the Security Code numbersPush the Control knob to [FM] or [AM].6 Repeat steps 4 and 5, and complete theSecurity Code.7 Confirm the Security CodePress the Control knob for at least 3 seconds.When "Re-Enter" is displayed, "Security" isdisplayed.8 Do the step 4 through 7 operation, andreenter the Security Code."Approved" is displayed.The Security Code function activates.• When the wrong Code is entered in steps 4 through 6,repeat from step 4.Press the Reset button and when it’s removedfrom the battery power source1 Turn the power ON.2 Do the step 4 through 7 operation, and enterthe Security Code."Approved" is displayed.The unit can be used.In Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"Beep : ON" Beep is heard."Beep : OFF" Beep canceled.In Standby modeManual Clock Adjustment• This adjustment can be done when the Clock> (page 43) is set as OFF.1 Select Clock Adjustment modePush the Control knob to [FM] or [AM].Select the "Clock Adjust" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob to [FM] or [AM].Adjust the minutesPush the Control knob to [4] or [¢].4 Exit Clock adjustment modePress the [MENU] button.In Standby modeDate Adjustment1 Select Date Adjust modePush the knob to [FM] or [AM].Select the "Date Adjust" display.
