Kenwood eXcelon KDC-X789 Instruction Manual

Also see for KDC-MP628: Service manual Service manual

50 | EnglishMenu systemFunction of the KDC-MP7028/KDC-MP728/KDC-X789/KDC-MP628Other than Standby modeAudio Preset CallRecalling the sound setup registered by Preset Memory> (page 49).1 Select the sourcePress the [SRC] button.2 Enter Menu modePress the [MENU] button for at least 1 second."Menu" is displayed.3 Select Audio Preset modePush the Control knob to [FM] or [AM].Select the "Audio Preset" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset CallPush the Contol knob to [FM] or [AM].Select the "Call" display.6 Call up the Audio PresetPress the Control knob for at least 2 seconds.The "Call" display blinks 1 time.7 Exit Menu modePress the [MENU] button.• The User memory of (page 16) ischanged to the value which was recalled.• The source tone memory item of

(page 10) is changed to the value which was recalledby the selected source.In Standby modeDemonstration mode SettingSets the demonstration mode.1 Select the Demonstration modePush the Control knob to [FM] or [AM].Select the "DEMO Mode" display.2 Set the Demonstration modePress the Control knob for at least 2 seconds.Each time the knob is pressed at least 2 seconds,the Demonstration mode switches as shownbelow.Display Setting"DEMO Mode : ON" The Demonstration mode function is ON."DEMO Mode : OFF" Exit Demonstration mode (Normal mode).