Kenwood eXcelon KDC-X915 Instruction Manual

Also see for KDC-9015: Service manual

• This function cannot be operated while the Black Maskfunction is on.• Character items are not displayed when the graphic displayfunction is turned off.• During horizontal division modeThe left side display is switched each time the CLK button ispressed.The right side display is switched each time the DISP button ispressed.• This function cannot be operated while the Black Maskfunction is on.• The right side display items vary depending on the sourcethat is playing. For details refer to the "Switching Display"page for source modes.NOTEDISP buttonCLK buttonRight side displayLeft side displayStation frequencyBand display+ Preset station numberGraphicSpectrum Analyzer1Spectrum Analyzer2Spectrum Analyzer3Analog clockDigital clockSNPS name /Program Service nameBand display+ Preset station numberExample: Tuner modeYou can change the display in each mode.Selecting the Display Mode:Each time you press the D.M button for at least one second,the display mode changes as follows:Changing the Display:• During full-screen display modeEach time you press the CLK button, the display changes asfollows:NOTECharacterSpectrum Analyzer1Spectrum Analyzer2Spectrum Analyzer3"ALL OFF"CharacterDate + Clock(Standby mode)(Source mode)Full-screen display modeHorizontal division display modeVertical division display modeSwitching DisplayFunction of the KDC-X915/KDC-X815Turning non-fading output On/Off :Press the NF button for at least one second to set the functionON or OFF."NF ON" is displayed when the non-fading output is set ON.Non-Fading OutputGeneral features— 12 —English