Kenwood eXcelon KDC-X915 Instruction Manual

Also see for KDC-9015: Service manual

Function of the KDC-X915/KDC-X815“Bass EXT” : Switch the Bass Extend mode on/off.Setting values: ON / OFF(When the bass extend mode is set to on, lowfrequency response is extended by 20%.)This mode is available only when the Sound coordinate system ison. (page 38)NOTEFunction of the KDC-X915/KDC-X815“Bass Q” : Adjust the Bass quality factor.Setting values: 1.00 / 1.25 / 1.50 / 2.00This mode is available only when the Sound coordinate system ison. (page 38)NOTE“Bass” : Adjust the bass level.Setting values: - 8 – + 8Function of the KDC-X915/KDC-X815“Bass Frq” : Adjust the center frequency of the bass.Setting values: 60 / 70 / 80 / 100 (Only when the bass qualityfactor is set to 1.0, 1.25 or 1.5) / 150 (Only when the bassquality factor is set to 2.0) HzThis mode is available only when the Sound coordinate system ison. (page 38)NOTE"Kex"/"ec4" : Recalling the kenwood preset sound settingPress the preset buttons (#1-6).Settings: #1;Flat, #2;Rock, #3;Top40, #4;Jazz, #5;Easy,#6;Scan of #1-5• This mode is available only when the Sound coordinate systemis on. (page 38)• You can call the following settings with this function; basscenter frequency, bass level, bass quality factor, bassextension, treble center frequency, and treble level setting.Their setting values are different depending on the setting ofthe mobile preset plan mode(KDC-9015 only).NOTEAdjust various parameters of sound quality.Press the AUD button to enter the control mode.Selecting modePress either the FM or AM button.Each time the button is pressed, the adjustment mode willchange.Please refer to the following for the contents of theadjustment modes.Source tone memoryEach source (CD, FM, AM and disc changer ) has its ownmemory in which to store the bass, treble and N-F level settings.The settings made for a particular source are recalledautomatically whenever you use that source ( for example, FMmode uses the tone settings made for FM, AM for AM, etc.).Adjust each modePress the 4/¢ button.Please refer to the following for the adjusting values.Press the AUD button to end the control mode.43NOTE21Audio Control Setting— 9 —