Keysight Technologies E3646A User's And Service Manual

Also see for E3646A: User's and service guide

Contents

Keysight Technologies E3646A User's And Service Manual Manual pdf 43 page image

Getting Started 1Product at a GlanceE364xA User’s and Service Guide 19Voltage and current limit settingsYou can set the voltage and current limit values from thefront panel using the following method.Figure 1-4 Voltage and current limit settings1 Select the desired output and voltage range using theoutput selection keys and the voltage range selection keysafter turning on the power supply.2 Press to show the limit values on the display.3 Move the blinking digit to the appropriate position usingthe resolution selection keys and change the blinking digitvalue to the desired voltage limit by turning the controlknob. If the display limit times out, press again.4 Set the knob to the current control mode by pressing.5 Move the blinking digit to the appropriate position usingthe resolution selection keys and change the blinking digitvalue to the desired current limit by turning thecontrol knob.6 Press to enable the output. After about 5 seconds,the display will go to the output monitoring modeautomatically to display the voltage and current at theoutput.+ +LowHighOr12OrDisplayLimitDisplayLimitCurrentVoltageOn/OffOutputNOTE All the front panel keys and controls can be disabled with the remoteinterface commands. The power supply must be in the Local mode for thefront panel keys and controls to function.