Print (Screens) 19Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide 2872 In the Print Configuration Menu, press the Print to softkey; then, turn the Entryknob to select the network printer you want to configure (either #0 or #1).3 Press the Network Setup softkey.4 In the Network Printer Setup Menu, press the Modify softkey; then, turn theEntry knob to select the network parameter you want to enter.The setting that must be entered is:• Printer Address — this is the printer or print server's address in one of thefollowing formats:• IP address of a network-enabled printer (for example: 192.168.1.100 or192.168.1.100:650). Optionally, a non-standard port number can bespecified following a colon.• IP address of a print server followed by the path to the printer (forexample: 192.168.1.100/printers/printer-name or192.168.1.100:650/printers/printer-name).• Path to a Windows network printer share (for example: \\server\share).When the Printer Address is a Windows network printer share, the Modifysoftkey also lets you enter these settings:• Network Domain — this is the Windows network domain name.• Username — this is your login name for the Windows network domain.• Password — this is your login password for the Windows network domain.To clear an entered password, press the Clear Password softkey.5 Use the Spell, Enter, and Delete Character softkeys to enter the network printersettings:• Spell — press this softkey and turn the entry knob to select the character atthe current position.• Enter — press this softkey to enter characters and move the cursor to the nextcharacter position.• Delete Character — press the Enter softkey until the desired character ishighlighted; then, press this softkey to delete the character.NOTE You can use a connected USB keyboard instead of using the Spell (and other) characterediting softkeys.
