Keysight Technologies M9537A Startup Manual

Also see for M9537A: Installation guide

Keysight M9537A AXIe Embedded Controller Startup Guide 5Step1: Unpack and Inspect the ModuleStep1: Unpack and Inspect the ModuleInspect for DamageAfter unpacking the controller module, carefully inspect it for any shippingdamage. Report any damage to the shipping agent immediately. Shippingdamage is not covered by the warranty.If you need to return the module for serviceIf it becomes necessary to return the module for repair or service:1 Review the warranty information shipped with your product.2 Contact Keysight to obtain a return authorization and return address. If youneed assistance in finding Keysight contact information, go towww.keysight.com/find/assist (worldwide contact information for repairand service) or refer to the support information on the product web page atwww.keysight.com/find/M9537A.3 Write the following information on a tag and attach it to the controller.-- Name and address of owner.-- Product model number (for example, M9537A)-- Product serial number (for example, TWxxxxxxxx).-- A description of failure or service required.Keysight’s AXIe modules are shipped in materials that preventstatic electricity damage. Remove the modules from thepackaging in an anti-static area only.Ensure that correct anti-static precautions are taken. Store allmodules in anti-static envelopes when not in use.To avoid damage when handling a module; do not touch exposedconnector pins.Information on preventing damage to your Keysight equipment isavailable at www.keysight.com/find/tips.A Post Office box is not acceptable as a return address.