Keysight Technologies X-Series Getting Started Manual

Also see for X-Series: Installation notes Manual Programming guide

Contents

Keysight Technologies X-Series Getting Started Manual Manual pdf 50 page image

50 X-Series EMI Receiver Getting Started GuideInstrument Operating SystemLicensing New Measurement Application Software - After Initial PurchaseLicensing New Measurement Application Software -After Initial PurchaseAdditional measurement application software can be ordered after your initialpurchase of the EMI Receiver. Software upgrades are provided in a kit thatincludes an option based Entitlement Certificate and a license agreement. Thelicenses are downloaded from the license Web site onto a USB storage deviceso they can be loaded into the instrument.For all software upgrades, we recommend that the latest version of theinstrument software be installed. This ensures that the measurementapplication being licensed and activated is installed and is the most currentversion.The latest revision of the software may be downloaded from:http://www.keysight.com/find/mxe_software.A license key is usually for one Host ID only. The Host ID for Fixed andTransportable is the instrument model and serial number, for Network it is theserver’s MAC address, and for USB Portable it is the USB Dongle’s number(printed on the dongle).Installation procedure over USB For Fixed LicensesNo calibration is required after a measurement application installation.Table 4-1Step Action Notes1. Redeem the OptionUpgradeEntitlementCertificate— Follow the instructions on theCertificateAfter redeeming your Option UpgradeEntitlement Certificate you will receive an e-mailwith an attached License File.2. Save the license file — Save the.lic file to the rootdirectory of a USB storage device3. Load the license file — Connect the USB storage deviceto one of the EMI Receiver USBports.Windows will detect the new hardware and maydisplay the configuration menu.The instrument will automatically load thelicense file. (This may take a few minutes) Uponcompletion, the Keysight License Manager willdisplay a “Successful License Installation”message.Alternatively the license file can be manually installed over USB or LAN byplacing the license file in the following folder on the EMI Receiver.C:\Program Files\Keysight\licensing