36SEG Operating Instructions5 Mounting and dismounting5.4.3 Electrical connectionNote!For electrical connection of the pull-rope emer-gency stop switches to Dupline ® input module,see the operating instructions "Dupline® inputmodule for pull-rope emergency stop switches"(for further details of this: see Section 4.4: „De-vice identification“, page 26).Preparatory work1. Open the cover (4). To do this, loosen the twoscrews (9) (see Fig. 5-2).2. Remove the protective plug from the screwed cablegland (11).3. Remove the screwed cable gland nut (11).4. Remove any dirt from the cable and slide screwedcable gland nut (11) onto the cable. The sealingsleeve in the screwed cable gland (11) must not bedirty or damaged.Fig. 5-3: Electrical connectionsX1 X213 1433 3453 5421 2241 4261 62X1 X2126 (N/O contact,control circuit)5 (N/C contact,safety circuit)12Pull rope side 14128