King gates OVO550 Instructions And Warnings For Installation And Use

Contents

King gates OVO550 Instructions And Warnings For Installation And Use Manual pdf 21 page image

20ENIncorporated radio receiver technical specificationsType 4 channel receiver for incorporated radio commandFrequency 433.92 MHzCoding KingTransmitter compatibility (*) Clipper, Stylo 4, Stilo 4K, Myo C4, Novo TX and Novo DigyNo. of transmitters that can bememorisedUp to 160 if memorised in mode 1Input impedance 52ΩSensitivity better than 0.5μVRange of the transmitters From 100 to 150m. The range can vary if there are obstacles or electromagnetic disturbances,and is also affected by the position of the receiving aerialOutputs /Working temp. -20°C ÷ 55°C10. CE Declaration of conformityDeclaration of conformity as per Directive 2004/108/CE (EMC)Declaration code: K101/OVORev.: 0.Language: ENManufacturer’s name: KING GATES S.r.l.Address: Via Malignani, 42 - 33077 - Sacile (PN) ItalyType: Electromechanical gearmotor with incorporated control unitModel: OVODIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutualrecognition of their conformity, in accordance with the following harmonised standards:- Health protection: EN 50371:2002- Electrical safety: EN 60950-1:2006+A11:2009- Electromagnetic compatibility EN 301 489-1 V1.8.1:2008, EN 301 489-3 V1.4.1:2002- Radio spectrum: EN 300 220-2 V2.3.1:2010• DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating toelectromagnetic compatibility and repealing Directive 89/336/EEC, in accordance with following harmonised standards.EN 61000-6-2:2005, EN 61000-6-3:2007In addition, the product conforms with the following Directive on partly completed machinery:• Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast), in accordance with the followingharmonised standards:- It is hereby declared that the relevant technical documentation has been compiled in accordance with Annex VII Part B of Directive 2006/42/CE and that the following essentialrequirements have been applied and fulfilled: 1.1.1- 1.1.2- 1.1.3- 1.2.1-1.2.6- 1.5.1-1.5.2- 1.5.5- 1.5.6- 1.5.7- 1.5.8- 1.5.10- 1.5.11- The manufacturer undertakes to transmit, in response to a reasoned request by the national authorities, relevant information on the partly completed machinery. This shall bewithout prejudice to the intellectual property rights of the manufacturer of the partly completed machinery.- Should the partly completed machinery be put into service in a European country with an official language different to the one used in this declaration, a translation into thatlanguage must be provided by the person bringing the machinery into the language area in question.- The partly completed machinery must not be put into service until the final machinery into which it is to be incorporated has been declared in conformity with the provisions ofDirective 2006/42/CE, where appropriate;In addition, the product GD0N complies with the following standards: EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 + A13:2008+A14:2010; EN 60335-2-95:2004The product complies with the following standards (limited to the applicable sections): EN 13241-1:2003, EN 12445:2002, EN 12453:2002, EN 12978:2003Sacile, 19-06-2012Alex Antoniolli(Managing Director)

/ 22

Related manuals for King gates OVO550