LSC maXim MP Operator's Manual
                                                                                    | |
Contents
| 
maXim MP L(P) XL(P) XXL(P)Operator Manual V3LSC Lighting Systems (Aust) Pty. Ltd. Page 6722 VIDEO22.1 VIDEO OVERVIEWYour maXim is fitted with a VIDEO output to connect a SVGA computer monitor.Typical video screen.The video screen is divided into the main display(the white area on this simulation) and theselectable areas (dark areas on the left).22.2 MAIN DISPLAYThe main part of the screen shows the fixtureintensities (cyan bargraphs) at the top, a messagearea in the middle and the status of the playbacks,flash settings, time masters, STL settings, USBdevices, stack and masters at the bottom.Intensity levels are shown in tens on the side axisof the display and in units inside each individualbar. The “Fixture Intensity” levels are shown priorto the patch.The contents of each playback is shown in the“TYP” (TYPE) row by a symbol and colour. Thecolour is repeated in the bargraph.Scene Stack ChaseIn this example;• Playbacks 2, 3, 4, 5, 8 & 9 containscenes (orange).• Playback 6 and 7 contain chases (green).• Playback 10 is a stack memory(magenta).The page number that the memory is recordedin is shown in the “PGE” (PAGE) row. Thismay be different to the current page due to a“page freeze”. In this example, playbacks 6and 7 contain chases from pages 8 and 5respectively.22.3 SELECTABLE AREASThe left side of the screen is selected by theoperator and shows either:• 1 of 4 selectable video pages (not shownabove, see below) or• If none of the 4 pages are selected it furtherdivides the left side into 4 areas and allowsyou to select any 4 Playbacks or the stackmaster and “pin” a status display for thatPlayback or stack into any of the 4 positions(as shown above).22.3.1 PINNED VIDEOWhen a playback or the stack is “selected’, avideo display is automatically pinned. Press;[select], [f/a] (playback or stack to pin).To select a specific position for the pinned display;HOLD [function], tap [f/a] (video 1 to 4).(Video 1 is at the top left of the screen and video 4is at the bottom).Holding [function] and tapping [f/a] (video 1 to 4)again, turns off (unpins) the display.Press [select] (de-selects select) to finish.Bargraphs offixture outputlevels.“Pinned”video 1“Pinned”video 4Playback &Mastersstatus“Pinned”video 3“Pinned”video 2Flash, Timefader andSTL settings.USB statusMIDI status |
Related manuals for LSC maXim LP
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine