LaCie 12big Rack Fibre 8 Module Removal & ReplacementUser Manual page 763. Slide the Drive Carrier module, gently, all the way into the en-closure until it stops and seat it by pressing with your thumb onthe left edge of the module (Fig. 91).4. Secure the drive carrier by closing the handle until it fully en-gages. A click should be heard as the latch engages and holdsthe handle closed (Fig. 92).5. Continue populating all the drives for your configuration. Anydrive bay not being occupied by a populated drive carrier musthave a dummy drive carrier installed.5.4.7.3. Engaging the Anti-tamper LocksThe anti-tamper locks (Fig. 93) are fitted in the Drive Carrier handlesand are accessed through the small cutout in the latch section of thehandle. Drives are supplied with the locks set in the locked position.1. Carefully insert the lock key provided into the cutout in the han-dle and into its socket.2. Rotate the key in a clockwise direction until the “red” indicatoris visible in the aperture beside the key.3. Remove the key.Fig. 91 - Inserting the Drive Carrier ModuleFig. 92 - Securing the Drive Carrier ModuleFig. 93 - De-activating the Anti-tamper Lock
