User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR24Auto-switch.Start Recording Start all-day normal recording or motion detection recording for all channels.Quick Set Set the video output mode to Standard, Bright, Gentle or Vivid.All-day Playback Play back the video of the selected channel.Aux Monitor Switch to the auxiliary output mode and the operation for the main output is disabled.Note: If you enter Aux monitor mode and the Aux monitor is not connected, the mouseoperation is disabled; you need to switch back to the Main output with VOIP/MONbutton on IR remote control and then press the Enter button.Note: If the corresponding camera supports intelligent function, the Reboot Intelligence option is includedwhen right-clicking mouse on this camera.3.2.3 Using an Auxiliary MonitorCertain features of the Live View are also available while in an Aux monitor. These features include:• Single Screen: Switch to the single full screen by choosing channel number from the dropdown list.• Multi-screen: Adjust the screen layout by choosing from the dropdown list.• Previous Screen: Switch to the previous screen.• Next Screen: Switch to the next screen.• Quick Set: Set the video output mode to Standard, Bright, Gentle or Vivid.• Menu Output Mode: Select the menu output mode to HDMI/VGA, Main CVBS or Auto.• Main Monitor: Switch to the Main Output mode and the operation for the auxiliary output isdisabled.Note: In the live view mode of the main output monitor, the menu operation is not available while Aux outputmode is enabled.3.2.4 Main/Aux Output SwitchingWhen the HDMI/VGA output is configured as the main output, you can perform the following operation toswitch to CVBS output as the main output.Steps:1. Use the mouse wheel to double-click on the HDMI/VGA output screen, and the following message boxpops up:Figure 3.2 Switch Main and Aux Output2. Use the mouse wheel to double-click on the screen again to switch to the Aux output, or click Cancel tocancel the operation.3. Select the Menu Output Mode to Main CVBS from the right-click menu on the CVBS output monitor.
