User Manual of LV-D2104CS,LV-D2108CS,LV-D2116CS Series DVR334.1 Configuring PTZ SettingsPurpose:Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be donebefore you control the PTZ camera.Before you start:Check that the PTZ and the device are connected properly through RS-485 interface.Steps:1. Enter the PTZ Settings interface.Menu>Camera>PTZ>GeneralFigure 4.1 PTZ- General2. Choose the camera for PTZ setting in the Camera dropdown list.3. Enter the parameters of the PTZ camera.Note: All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocolcan be set for network cameras.Example: If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud rate field.4. Click Copy if you want to configure same settings to other PTZ cameras.5. Click Apply button to save the settings.4.2 Setting PTZ Presets, Patrols & PatternsBefore you start:Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.4.2.1 Customizing PresetsPurpose:Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takesplace.Steps:1. Enter the PTZ Control interface.Menu>Camera>PTZ>More Settings
