Lab.gruppen PLM series Operation Manual

Also see for PLM 10000Q: Supplementary guide User manual addendum Specifications Quick start Technical data

Contents

Lab.gruppen PLM series Operation Manual Manual pdf 2 page image

Important Safety InstructionsiPLM Series Operation Manual rev 1.1.91. Important Safety InstructionsBefore using the device, be sure to carefully read the Safety Instructions. Keep this document with the device at all times.1.1 Important Safety Instructions1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with a dry cloth.7. Do not block any ventilation openings. Install in accordancewith the manufacturer’s instructions.8. Do not install near any heat sources such as radiators, heatregisters, stoves, or other apparatus (including amplifiers)that produce heat.9. Do not defeat the safety purpose of the polarized orgrounding-type plug. A polarized plug has two blades withone wider than the other. A grounding-type plug has twoblades and a third grounding prong. The wide blade orthe third prong is provided for your safety. If the providedplug does not fit into your outlet, consult an electrician forreplacement of the obsolete outlet.10. Protect the power cord from being walked on or pinched,particularly at plugs, convenience receptacles, and the pointwhere they exit from the apparatus.11. Only use attachments/accessories specified by themanufacturer.12. Use only with a cart, stand, tripod, bracket, or table specifiedby the manufacturer, or sold with the apparatus. When acart is used, use caution when moving the cart/apparatuscombination to avoid injury from tip-over.13. Unplug this apparatus during lightning storms or whenunused for long periods of time.14. Refer all servicing to qualified service personnel. Servicingis required when the apparatus has been damaged in anyway, such as power-supply cord or plug is damaged, liquidhas been spilled or objects have fallen into the apparatus, theapparatus has been exposed to rain or moisture, does notoperate normally, or has been dropped.15. Use the mains plug to disconnect the apparatus from themains.16. WARNING: To reduce the risk of fire of electric shock, do notexpose this apparatus to rain or moisture.17. Do not expose this equipment to dripping or splashing andensure that no objects filled with liquids, such as vases, areplaced on the equipment.18. The mains plug of the power supply cord shall remain readilyoperable.19. Do not connect the unit’s output to any other voltage source,such as battery, mains source, or power supply, regardlessof whether the unit is turned on or off.20. Do not remove the top (or bottom) cover. Removal of thecover will expose hazardous voltages. There are no userserviceable parts inside and removal may void the warranty.21. An experienced user shall always supervise this professionalaudio equipment, especially if inexperienced adults orminors are using the equipment.22. The US National Differences clause 16.3 requires thatnetwork cables must be flame rated VW-1.To prevent electric shock do not remove top or bottom covers.No user serviceable parts inside, refer servicing to qualifiedservice personnel.à prévenir le choc électrique n’enlevez pas les couvercles. Il n’y apas des parties serviceable à l’intérieur, tous reparations doit etrefaire par personnel qualifié seulment.To completely disconnect this equipment from the AC mains,disconnect the power supply cord plug from the AC receptacle.The mains plug of the power supply cord shall remain readilyoperable.Pour démonter complètement l’équipement de l’alimentationgénérale, démonter le câble d’alimentation de son réceptacle. Laprise d’alimentation restera aisément fonctionnelle.1.2 StandardsThis equipment conforms to the require-ments of the EMC Directive 2004/108/ECand the requirements of the Low VoltageDirective 2006/95/EC.Standards applied: EMC EmissionEN55103-1, E3EMC Immunity EN55103-2, E3, with S/Nbelow 1% at normal operation level.Electrical Safety EN60065, Class IThis equipment is tested and listed accord-ing to the U.S. safety standard ANSI/ UL60065 and Canadian safety standard CSAC22.2 NO. 60065. Intertek made the testsand they are a Nationally Recognized Test-ing Laboratory (NRTL).1.3 Explanation of Graphical SymbolsThe lightning bolt triangle is used to alert the user tothe presence of un-insulated “dangerous voltages”within the unit’s chassis that may be of sufficientmagnitude to constitute a risk of electric shock tohumans.The exclamation point triangle is used to alert theuser to presence of important operating and serviceinstructions in the literature accompanying theproduct.