Labwit ZWYC-290A User Manual
                                                     | |
Contents
| 
Ultimate-cell Stackable Shaking Incubator V2017.233This function indicates the ideal red light output for the system to reach for thesegment. Use the keyboard to enter the ramp end red light output from 0-100%.Blue—Ramp End Blue Light Output buttonThis function indicates the ideal red light output for the system to reach for thesegment. Use the keyboard to enter the ramp end red light output from 0-100%.HOLD—Hold TimeThis function indicates the time of hold step, which is the length of time that the unithas to maintain the (Ramp End) light outputs for the segment. Use the keyboard toenter the hold time from 0-999mins.LAST—“Last” ButtonPress it to return to the set page of previous segment.NEXT—“Next” ButtonPress it to forward to the set page of next segment. Start the program operation.Switch the "LIGHT MODE" in the "SET" page to "PROG " mode. The programwill start according to the saved program. Pause the program operationTo pause the program that is in operation, press the "LIGHT" switch in the homepage to "OFF". The timer will be paused. Switch the "LIGHT" to "ON" to resumethe current program. Exit the program operationDifferent from the temperature and speed system, there is no need to set atermination point for the program. So the program will keep running in cyclescontinuously until it's switched off manually.To manually exit the program that is in operation, switch the "LIGHT MODE" inthe "SET" page to "FIXED " mode. The program will exit the current programoperation, and switch back to Fixed Value control mode.6.6 Operating the Humidity SystemThe humidity system features direct steam injection as well as active dehumidificationsystem, which enables extended applications where various humidity level is needed.The humidity system only operates under Fixed Value control mode. It will auto-matically switch off when the control mode is switched to Programmable mode.Under Fixed Value control mode, the relative humidity level can be set via the 6.4Operating Temperature and Speed System --Fixed Value ModeThe accuracy of relative humidity value is 0.1%RH.A setpoint of 60-70%RH is sufficient to prevent evaporation. In some ideal conditions, |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine