Facsimile Features1508IP-Fax SettingsMake settings to use IP-Fax.Set H.323 for the gatekeeper, SIP forSIP server, and gateway for gatewayaccess if necessary. Check the settingsof the network to which this machineis connected before making settings.Note❒ The following characters can beused for registration of the aliastelephone number in H.323 Set-ting. Make sure you enter thesecharacters correctly:• Numbers• Symbols (# and *)❒ The following characters can beused for registration of the SIPUser Name in SIP Settings. Makesure you enter these characterscorrectly:• Alphanumeric symbols (lowerand upper cases)• The 21 symbols in the followingtable.❒ Use numbers and periods (“.”) toenter the correct IP addresses forthe gatekeeper, SIP server, andgateway. You can get the correct IPaddresses from the network ad-ministrator.❖ Enable H.323Specify whether or not H.323 isused for IP-Fax transmission.• On• Off❖ Enable SIPSpecify whether or not SIP is usedfor IP-Fax transmission.• On• Off❖ H.323 SettingsSet the IP address and alias tele-phone number of the gatekeeper.For details, see p.151 “Configuringthe H.323 gatekeeper”.• Gatekeeper Address (Main)• Gatekeeper Address (Sub)• Own Fax No.❖ SIP SettingsSet the SIP server's IP address andSIP user name. For details, seep.151 “Configuring the SIP serv-er”.• Proxy Server Addr. (Main)• Proxy Server Address (Sub)• Redirect Svr. Addr. (Main)• Redirect Svr. Addr. (Sub)• Registrar Address (Main)• Registrar Address (Sub)• SIP User Name❖ Program / Change / Delete GatewayRegister, change, or delete the gate-way used for transmission to IP-Fax. For details, see p.152 “Regis-tering or changing a gateway” andp.153 “Deleting a gateway”.• Program / Change (Prefix, Se-lect Protocol, Gateway Address)• Delete; ? : & =+ $ , - _. ! ~ * #‘ ( ) % /@
