Advanced Features554Destination ListA Select [q Quick Dial].B Enter the registration numberof the destination list wherethe Receiving Station is stored.For example, to select the regis-tration number stored in QuickDial 01 of the Transfer Station,enter: {0} {1}.Note❒ You can enter up to five digits.Speed DialA Select [qp Speed Dial].B Enter the number of the SpeedDial code.For example, to select the numberstored in Speed Dial 12 of theTransfer Station, enter: {1} {2}.Group DialA Select [qpp Group Dial].B Enter the number of the Groupnumber.For example, to select the numberstored in Group Dial 04 of theTransfer Station, enter: {0} {4}.G To specify another Receiving Sta-tion, press [Add].Note❒ Press [UPrev.] or [TNext] to seethe Receiving Stations alreadyentered. You can select a Re-ceiving Station from this list andremove it by pressing [Clear] orthe {Clear/Stop} key.H When you have specified all theReceiving Stations, press [OK].I Press [Exit].The Transfer Stations and Receiv-ing Stations are displayed.J Press the {Start} key.With transfer requests set in the SystemSettings menuYou can program a Destination keywith Transfer Station and/or ReceivingStation under Program/Change/De-lete Transfer Request in the SystemSettings menu. See “Registering theTransfer Request”, General SettingsGuide.A Place the original, and then selectthe scan settings you require.Referencep.15 “Placing Originals”, Fac-simile Reference p.34 “Scan Settings”, FacsimileReference B Press the key programmed withTransfer Request.C Press the {Start} key.
