Administrator Setting1749❒ You can select to receive only fromprogrammed senders or receive onlyfrom senders other than those pro-grammed in User Parameters. Seep.167 “User Parameters” (switch08, bit 2).❒ If you select “Off” for “AuthorizedRX” in “Initial Set Up”, settings arethe same as the Reception Settings.See p.147 “Reception Settings”.❒ You can change Special Senders inthe same way as you program them.ForwardingUse this function to print receiveddocuments, and then transfer them tothose receivers programmed before-hand.Folder destination can be registered.It is also possible to forward faxessent only by senders programmed asSpecial Senders.Note❒ To use this function, program yourSpecial Senders, and then select“On” for “Forwarding” in “Recep-tion Settings”. See p.147 “Recep-tion Settings”.❒ If you specify “On” in “Forward-ing” and select [Same as Basic Set-tings], the fax document is forwardedto the receivers programmed in“Specify End Receiver.”. See p.162“Forwarding”.❒ If you do not program any SpecialSenders, the machine transfers allincoming documents to the otherend receivers specified in “SpecifyEnd Receiver.”.❒ You can set the fax destination, In-ternet fax destination, IP-Fax desti-nation or folder destination, as aforward destination.❒ Set folder destinations using theAddress Book Management func-tion under System Settings. See“Registering Folders”, General Set-tings Guide.❒ If you have specified a folder forforwarding, you can specify the fileformat used for forwarding. Seep.167 “User Parameters” (switch21, bit 3).Reception File Print QuantityUse this function to print the speci-fied number of copies of documentsreceived from programmed senders(Special Senders). If you do not pro-gram any Special Senders, the ma-chine prints the specified number ofcopies for all received documents.Limitation❒ You cannot use multi-copy print-ing with Polling Reception, Confi-dential Reception, or MemoryLock.Note❒ You can specify up to 10 copies.Print 2 SidedThe optional duplex unit and HDD arerequired.Use this function to print on bothsides of the paper.Limitation❒ If you select the bypass tray for“Paper Tray”, duplex printing isdisabled.
