Lanier LD225 Function Manual

Also see for 8025: Network guide Fax guide Operating instructions Function guide Settings guide

Contents

Lanier LD225 Function Manual Manual pdf 113 page image

Settings1059SettingsScan SettingsThis section explains how to set thedefaults for scan settings.The scan settings consist of the fol-lowing. For the table about settingsand defaults, see p.101 “Scanner Fea-tures”.❖ Default Scan SettingsVarious basic settings (scan type,resolution, image density, andscan size) can be set. You can regis-ter the scan settings in the sameway as specifying them. For de-tails, see p.77 “Specifying Scan Set-tings”.• Scan Type• Resolution• Image Density• Scan Size❖ Wait Time for Next Orig.: ExposureGlassWhen dividing originals and scan-ning them individually with theexposure glass to form a single file,select [Off], [Set Wait Time], or [Con-tinuous Wait] for the waiting status.Note❒ If you select [SADF] in [OriginalFeed Type] on the Scan to Folderscreen, the [Wait Time for NextOrig.: Exposure Glass] setting be-comes invalid.❒ If you select [Batch] in [OriginalFeed Type] on the Scan to Folderscreen, the [Wait Time for NextOrig.: Exposure Glass] setting be-comes invalid, and the machinewaits for an additional originalto be put in place.See p.80“Batch/SADF selection”.❒ If [Set Wait Time] is selected, en-ter the wait time in seconds (3-999) for placing additional orig-inals with the number keys.Scanning will start if additionaloriginals are placed and the{Start} key is pressed withinthis time. You can end scanningand begin transmission bypressing the {#} key within thistime. Once the specified timehas elapsed, transmission startsautomatically.❒ If [Continuous Wait] is selected,the machine will wait for addi-tional originals until the {#} keyis pressed. Scanning will startwhen additional originals areplaced and the {Start} key ispressed. You can end scanningand begin sending by pressingthe {#} key.❒ If originals are placed in the au-t o m a t i c d o c u m e n t f e e d e r(ADF), transmission will startwithout waiting for additionaloriginals after all originals inthe ADF have been scanned, re-gardless of the specified set-tings.❒ If a paper misfeed occurs or anyof the following operations isperformed while the machine iswaiting for additional originals,the countdown stops and doesnot start again until the {#} keyis pressed.• Changing the settings suchas the scan settings• Opening the upper cover ofthe ADF• Pressing the {Interrupt} key toactivate the copy mode